I have a 24,000 gallon vinyl lined in ground pool with a sand filter. I use a robotic vacuum Aquabot Turbo. How many times/week do you recommend that I run the Aquabot...

I have a puzzling issue here. My pump/filter works fine, constant 8-10lbs of pressure. That is
until I hook up the hose and adapter to the skimmer. As soon as I put it...

This pool is 3 years old. 15x30 above ground, 54 inch water depth, 1 1/2hp pump. Ever since day 1, when I would vacuum the pool dirt would recirculate into the pool. I...

My white pool paint is yellowing. I thought that it was a water hardness issue. It was low I raised it to the proper level and still yellowing. Is it an algae issue? Had...

My basic cheapy leaf rake got sun beaten and holes,so
I wanted to share a quick fix.Pry off the plastic guard that slips
over the aluminum frame.Next remove...

In switching over from conventional to Intelliflow we also found it necessary to bring flow up to half speed during sweep of the Polaris 380 lest its booster suck air...

Water is coming out of my backwash hose even though the pump is set to filter. The problem started after I did a backwash last week when I noticed the pressure was...

I am starting the process of converting from bacquil to chlorine. My pool water is very green. Should I
put in algecide first or change sand in filter?

de and dirt are returning back into the pool with old and new grids. any ideas what to do?

I have searched all over the internet and can't find replacement paper for the filter cartridge. I would like to just refurbish it instead of buying a new one. Anyone...

I have a 32’x16’x52” rectangular vinyl pool. I used a pre-fill filter that suppose to remove metals while filling the pool. We have well water with a lot of metals. I’m...

Hello

I have volunteered to run the community swimming pool in a hot and sunny place for members of the UK Armed Forces, the problem I have is how to know if I am doing...

I have an outdoor pool which is 20m x 10m and we are finding it is getting slippy on the vinyl bottom, we have vacuumed, but anyone got any ideas what I can do to stop...

how often should i use shock?

I just recently put up our backyard pool, my first-ever pool. It measures 15' X 48" (457cm X 122cm). I've got everything hooked up to it's pump, but the pump...

I have a below ground concrete pool and a sand filter. The whole thing is only three years old. A brown/green 'dust' precipitates out of the water and covers the bottom...

Even BEFORE I hook up my vacuum there just isn't much suction at all in the skimmer... and therefore, when i do hook up the vacuum line, nothing is happening in terms of...

Every time my filter is running I notice I am getting a lot of sand on the bottom of my pool. Can anyone tell me what this is indicative of? What is the fix?
Thanks!

Hey everybody. I am kind of taking over responsibility for the pool because of my dad's back.

First off, I'll have to say that our pool and equipment are OLD. The pool...