I have an undergrood pool which is 15 x 35 and the pressure on the gauge reads always around 30 psi. My guage is new and is drops down to 0 when it's off , so that's not...

Hi all. This is driving me crazy maybe someone can help. I vacuum the pool and the next day the same dirt seems to be on the bottom. It is very fine and seems to...

Hi ,

Can somebody help me? i clean a utopia pool with a filter bag system. the problem i have is this week we had a sand storm and the pool was covered in sand. when i...

Hi could someone help me pleas? I am just learning about my pool so I may be a bit slow on the uptake.

My problem is, everytime I clean & back wash my pool the...

All of a sudden there is sand in my above ground pool it is filter sand and how and why is it getting in when I have made no changes in my system

I am in the market for a robotic inground pool vacuum. My pool is 16 x 32 with a vinyl liner and removable steps. It is approximately 6 feet deep at the deep end. It...

Ok, I cleaned my pool this evening and just as I was finishing up I looked over and the strainer basket was sitting in the middle of the driveway. The vaccum was...

Hello all,

I recently purchased a house last year with a 12x32 fiberglass inground pool. It's about 35 years old with a 3 foot shallow end sloping to a 6 foot deep end....

I have a Hayward Perflex DE filter EC65. I need to replace a finger before initial startup. Does anyone know how to do that? Would appreciate any information on that...

We are trying to convert our DE filter to Fiber Clear due to reports of better water clarity.
However, it seems our pressure raises 10 psi in 24 hours after backwashing...

This is a confusing problem and it has taken me months to figure it out so I am really hoping someone can help us here as Summer is approaching.

Okay - I have a Spa and...

Being the victim of iron staining in my pool has driven me to desperate measures to find a cure for this malady.

Recently I drained my pool and using Scotchbrite fine...

I have two 100 sq ft filters...one in use and one soaking in a 25 gallon Rubbermaid trash can in a solution of water and 20% Muratic acid (purchased at Home Depot for...

I was given a 1 hp pump motor that I would like to use for vaccuuming my 20x40 inground pool. I'm looking for an inexpensive filter system to hook up to the pump. Any...

I did a back wash on my pool and then a rinse. After rinsing I forgot to turn it back to the normal pump. My timer cut on in the middle of the night and it was on rinse...

Dirt from my pool recirculates back into the pool after running through my (near new) cartridge filter

Giday All,

I have a plain Onga cartridge filter (27') with a new cartridge. When I vacuum the dirt is coming back into the pool through the outlet pipe. There is no...

My filter pressure keeps running high. I have a DE pool. I took the filter apart and hosed off the filter panels but it is still running high. When I backwash, nothing...

Hi,

My pump is supposed to operate at 60 KPa when filtering. Recently it has been quickly rising to 120 KPa, at which level the suction is much lower due to I suppose...