I had blue cloudy water and added clarifier. I ran the filter for several hours and then turned it off overnight. I got up this morning and I can see stuff at the bottom...

I removed old sand and inspected laterals for cracks, installed new sand and still getting sand in pool. The pressure never changes like it should when the filter is...

I have just changed my pump/filter from a cartridge type filter to a sand filter (Astralpool Cantabric 600). On the previous system the water was drawn from the skimmer...

New to pools. Having a problem in priming vac hose; slowly sinking the hose (attached to vac head) into the water with hose following does not fill the hose; placing the...

I have an Anthony pool circa 1986. I'm having a problem with the valve that directs the filtered water to either return to the pool or to go to the drain. It is leaking...

First off, hello and I am so very glad to have found this forum.
I found this forum because I was searching the net to find out why our saline readings are so very...

Just bought a house w/ a pool, our first. We paid for a pool guy to come in and show us how to work the equipment and what did what and how to maintain water w/...

YES! Exciting new technology uses wind power to help (or completely) heat your pool water. Change nothing with your existing system, heater placed inline with your...

How can I get my 380 to spend more time at the deep end

When I complained some years ago that it wouldn't climb platforms or steps a Polaris rep suggested placing its...

I live in the Mojave Desert having a 35 gal conventional pool with sand filter presently using 1750-w 1-hp pump soon to replace with vf hoping significantly reduced...

my pump stopped working last night and i'm not sure how long it will take to get it diagnosed and fixed. How many days before serious algae or other problems arise? I...

Recently changed the feed hoses on my Polaris 360 pool cleaner. I disconnected all the hoses, and now I forget the exact location of where the Back Up Valve goes within...

1. setup:
I got an 18000g concrete pool with attached spa. I run a brand new 1.5 HP pump and have a cartridge filter.
2. Problem:
A while ago I noticed that when I am...

Problem with DE filter. A few day ago, pressure went over 30 and water came out the value (emptying about a foot of water from my 20 x 41 pool) before someone turned it...

What does sand look like that needs replaced? mine only one year old but i have had cloudy water
all summer long.The sand looked new no channels or anything,i have...

Hello everyone I am new on the forum this is my first thread up and any help would be greatly appreciated. I am constantly hearing my girlfriend talk to me about her...

New home owner and I dont have a clue how the normal operation of the valves should be. The pool equipment is all functional. There are 5 valves in front of the pool...

Someone please help! I have a 24' round, 52' tall above ground pool with a Hayward sand filter,with multi setting valve. Don't know the model # right off. When I try to...

new home/old pool. filter gauge reading in red. does not change after back-washing/rinsing. onga psf25 filter gauge was reading ok 6 weeks ago. has been turned off for...

I have an undergrood pool which is 15 x 35 and the pressure on the gauge reads always around 30 psi. My guage is new and is drops down to 0 when it's off , so that's not...