I think eventually we are going to have to get a new pump or filter. If things don't improve I will probably call a pool professional myself. See, my dad who I live with...

I've been looking high and low and can't find a chlorine test kit that will read up to 15ppm. Is anyone familiar with a kit that will go this high. It's impossible to...

Hi

I just bought the Blue Pearl.

I have a shiny tile swimming pool.

the problem is the wall climbing.

Nothing.

I have tested it in liner swimming pool.

excellent....

Hi,

My pressure gage died on me the other day. It's a sand filter that I inherited when I bought the house. To replace the gage, other than turning off the pump, do I...

we got a pop up pool 4 ft deep this year. the water turned brown after the first shock due to the iron in our water. i put the floc in last night circulated and this...

Hi All,

I just bought this house and I have been struggling with the filter. It just does not clean very well. The vacuum is not able to keep suction for long. When it...

I have a metal framed easy set pool 15x48 deep. This pool came with a cheap vacuum that attaches to the hose and it blows into a bag. I am fighting a algae problem and...

Hi

I have a 20x40 inground pool 11 ft deep.

Just got back from vacation made adjustment to chemical level.

Three days of storms I had a big mess, and had to vacum a...

I cleaned the fingers on my filter and am ready to reassemble. Before I do, am I supposed to fill the filter with water? Sorry for a dumb question, but I'm new to all of...

I have an Intex 18'x48" metal frame pool that I'm about to setup. It is a little less than 6500 gallons according to Intex's website. I would like to upgrade the...

does anyone know how to remove the valve w-diffuser on a Tegalus sand filter? Model # TM-50 Thanks,

I know that if the pressure on a DE filter goes to 8 to 10psi I should change the DE, but we have a large filter for our pool and after a month of running it, the psi...

I have spots on the bottom of our pool that looks like sand. But when you brush them away, it just disapears into a cloud.

So I've tried vacuuming this up, and then...

I have an 18x38 inground pool with a sand filter, the pump that was installed with pool is 1hp & someone told me that was sufficient for this size pool. The psi is...

I've got an above ground pool. My chloriene, ph, alk., etc are all good. I just did my weekly shock treatment yesterday.

I need to add some water to my pool from...

I have a triton sand filter. Not sure of the model I just know it takes 150lbs of gravel and 450 lbs of sand. or 600lbs of sand. What is the easiest way to change the...

Hi

I am new to owning a pool. We just bought this place and the pool came iwth it.

The filter and pump are of Hayward brand and they were working fine. About 3 weeks...

what is the purpose of backwashing? i am new to the job and i run a pool at a country club. i have gotten the hang of just about everything but i have a lot of random...

After a heavy rain with high winds my pool had a yellow look and it settled on the bottom. As soon as the creepy crawler touched it it went into clouds in the water then...

Hi folks fabs here. I've been having problems with our pool now quite some time now. It seems that there are always some bubbles/air pockets visible in the filter cover....