Hi all,

I have a oval aboveground pool approx 33 x 18 and goes from 42" to a little over 5" in depth. I can never get the PH or the TA to raise no matter...

After vaccuming pool I took a water sample from filter waste. I keep getting rusty fine sediment and staining on pool sides and steps.Pool is clear and chemicals are...

pls can you tell me what quantity of chemicals i have to add to my swimming pool 120m3 to low my high ph its above 8 and if i have to add all the quantity at once or day...

I have been trying to lower my ph with sodium bisulfurate but my TA is very high - around 200 ppm. My test kits also say that my chlorine is very low.

My pool is...

I work at a multi pool facility where we have a 50 metre , wave pool, 16 man swirl pool and a tot pool. We have be having trouble with the swirl and tots pools the last...

Well i have a round 21ft pool and it is 4ft deep

and our pool pH level is low :cry:

how do i get it up to a normal level??

and then what chemical do i use? :?:...

anyone have any ideal why my fiberglass pool underground would be

bulging at the side.

ted dodd

It says I need 1360 grams of soda ash to bring down TA 100 ppm in a 68000 liter pool??

This doesn't sound right, Taylor recommeds 53 pounds (24 kilos) if I remember....

We have a small 12X30 easy set type pool and I cannot seem to get the PH to raise, it stays at 6.8

I have added the raise PH stuff many times and it stays at 6.8...

I've calculated that i need to brin my total Alkalinity down 700 ppm and in order to do this I need to add just over 12 liters of Hydrocloric acid to my 11,200 Liter...

My spa's TA is off the charts high... I can't even get a reading for it (my solution becomes supersaturated long before the test turns color). But I know it is high. My...

Hi,

I have the following problem.

I've just opened my pool and when I'm testing the water I get some strange results:

The water is overchlorinated

The pH test...

I purchased an Intex Easy Set pool that holds approx. 1750 gallons last week. I bought an hth starter kit and followed the directions. We had a great time in it the...

Hi, we live in Illinois and have had a tough time balancing our PH & Alkalinity. Alkalinity is high & PH low. We raise PH then lower Alkalinity, which in turns...

I have an above ground pool with light green cloudy water, NO ph, and VERY high alk. I adjusted the ph with a Riser, then added Muratic Acid to lower the alk, but I...

On testing my water this weekend, I found that the total alkalinity was only 50ppm. Using this website's calculator, I found that I needed to add 500 g of Sodium Bicarb...

help!my ph level is way high and my ta level is way low.what should i do first to avoid spinning my wheels?tackle ta 1st or ph 1st?

Hi I had my pool water checked and the results were very low. So I had to buy 3, 18kg pails of chemicals to be added.

But I was wondering will this large amount of...

Well I've been searching but haven't yeilded any good results. I got a pool that I haven't been able to rasie the PH above 6.8 in six weeks now. I've tried everything...

The alkalinity is 350ppm. The ph is the the lowest one on the test kit ( can't recall the #)

The ppol stores are no help. Told me to add ph plus and shock but still...