Had my dirt leveled out with a tractor and put a layer of 6mil black visqueen then added roughly 4”s of sand that has been compacted with pavers. Will this work for a...

I have an above ground metal frame Intex vinyl pool with a sand filter and salt water chlorine system. I suddenly started getting a coating of very fine sand or dirt on...

I am a very new pool owner. I have a 24 foot above ground pool. I have noticed some water loss about a quarter inch per day. The pool has a cover on it. Is this normal...

The liner tore on my 20 X 40 Lazy L Foxx pool at the intersection of the wall and the floor. My pool guy wants about $9000 to replace the liner not including water. He...

Hello All,

I have drained my above ground pool and have started to fill it up again using my garden hose. I have lots of wrinkles on the floor as can be seen by...

I took my pool down a while back. I Have decided to out it back up. When the water came up I found that my skimmer hole does not line up anymore. Is there a way I can...

Can someone who owns one of these tell me if it’s really necessary to mount this on wooden platform? Thanks.

Hello,

I cannot for the life of me get this thing to suck! I have followed the instructions (I think) by making sure that the hose is full of water. I have blocked A...

So I thought I levelled the ground pretty well and I started to fill the pool last night. This morning I checked the water level in the 4 corners of the pool.

On one...

I have a Coleman pool 22ft x 52in. One of the strainer fittings broke and the other is breaking. I attempted to replace with an Intex part, but they don't fit right and...

We've recently had to replace our old 24' pool. Instead of digging down to level, it was built up on a dirt circle to meet the height of our deck. The bottom linked up...

Ok so we bought this without really thinking things through (but at least it's not a dog :))

If our grass is level and we're prepared for it to die (we'll put...

I'm replacing a standard beaded liner on a 24' round above ground pool with 54" high wall. I've never done this before but generally do pretty well with projects...

16' 48" round pool. I have an area covered in sidewalk blocks that is not perfectly level so I am thinking of building an octagonal frame with two x four's to...

Bought brand new intex ultra frame 16x33 pool 2 years ago used for 2 weeks. We had a family crisis then it was not winterized. We did not open at all last year. The ice...

Hey guys,
So today we put up our 14’ round 48” deep summer waves stall frame pool. The frame itself is perfectly level in every direction, but the water on one “pie...

Hi, Hoping someone might have information on Intex Ultra pools. We had a 20x52 that lasted 3 years. We took it down because the legs rusted and liner was so faded. Well,...

We leveled as best we could, and have 2 tarps underneath.

We did not know before hand that liner pads or those corner/seam things for under the liner existed before....

Hi,
I have an 8ft intex above ground 500 gal pool.
I upgraded the pump last year to a Bestway flowclear 800 gallon filter pump. It ran all summer last year no problem...

Hello,

I am going to be replacing my pool liner soon and was wondering if i could just cut the old liner at the base of the foam cove, remove the sidewalls and leave...