18x33 AG installed by the book.

beaded liner.

started filling - looked good till after dark - heard a pop and found a chunk of wall had poped out of the top rail!...

Has anyone ever used the foam pads they have for under liners of AG pools. I have a real problem with moles and crawdads. Would this help with the problem?

Installed a new liner last Spring. Just 3 months later, two 1 foot by 4 inch by 2 inch deep dipressions appeared about 3 feet from the edge of the pool. What caused...

I am going to purchase a liner for our AG27' pool.Ive read about j hook liners>Are they better?are they easier to install?are they only for certain pools?NOVICE HERE,...

I had a new pool liner install in my inground pool this summer. I am fighting with the installer over the excessive winkles (more than 2). He told me when it was first...

O:K,

so we purchased a 30' AG pool with the stores installers doing the work.

They installed pool in late fall of last year. (Idiots)

About a week or so after...

I am installing a ag 27' pool.After I level the ground,do I put down the basetrack and post blocks on ground and then add sand or make a bed of sand big enough for base...

Ok, I am buying my first pool, it is a 20'x5' pool, or thats what the guy says. But I don't know if he is right. I have looked for a 20' pool liner incase something...

:?: I have a 22 year old Doughboy AG with the second liner. Appears to be doing fine from external view. Any tips?

the side wall of my pool rusted and caused a hole about 6 inches from the bottom...hole is about 2 inches in diam. this is the 3rd year in a row this happened and the...

I recently purchased a 27 "round above ground pool. I got a great deal on it. I am planning on moving the pool on Saturday. The owner of the pool installed a new...

I find two gauges of above ground replacement liners when looking online, 20 & 25 gauge. Is there really that much difference in the thickness, or quality, of the...

We just installed an above ground pool. It is a wood tongue and groove structure with (2) 1/16" thick stainless steel straps around the base (like a half whiskey...

Go to their website (the company that Mfg the chlorine generator) I'm guessing its an Intex pump/generator combo if you got it at that store. Intex has a website and you...

I have an 18' x 52'' above ground pool I recently installed..

I must admit I may have skimped on the cove material and I will fix that in the mornin....

but I...

I have a 12x20 with a 48" wall height. We were going to buy a 12x20 with a 52" wall height liner. Does anyone think that we will have problems with...

Hello

I recently bought a self supporting pool, but as I have a 3 year old, I need to keep it covered when not in use. Can I run the filter pump when the pool is...

hi all, I am new here. when I pulled the trap off the pool today I seen that the liner had let go at the edge of one section(above ground pool) Can this be repaired or...

hi just wondering how much salt to put into my 15ft above ground swimming pool as its going a litttle green and i have got my fathers 50th soon so bbqs comming and the...

water coming out of backwash hose in filter position