We just had our pool remodeled. The pebbletec was installed yesterday and acid washed today. The color (Aqua White - which is light blue) is very inconsitent. Its very...

We are in the process of finishing up our new pool construction and have run into a problem. We wanted a dark or black bottom pool both for aesthetic solar reasons. I...

All of sudden in the last week or so my pool bottom,steps etc are like sand paper. The walls are still real smooth. Even the tile dolphins at the bottom are rough....

Grand child tossed a couple of metal trucks into pool and they were not noticed for about a week. When removed they left rust stains on the plaster bottom. Anyone have a...

We live in South Florida and are about to change out the tile around the waterline of our pool with about a foot hight band of Sicis glass mosaic tiles. We had the pool...

we just put in a new pool and definently selected the diamond brite over pebble tec because of the smoother surface. our diamond brite doesn't hurt our feet or the feet...

Our pool is just going on 6 years old this summer. We keep the chemicals balanced and have not had any recent earthquakes.

We had been losing water and isolated the...

I recently resurfaced my gunite pool. Now I have calcium forming on the underwater surface. It is like course sandpaper. How do I get rid of this?

I jsut open my pool. pressur wash it , i see white stuff. try real hard to

remove with pressur washer but it's hard to ermove it. i did paint last

year. any...

I am adding a spa to my existing Gunite/Plaster pool and have received several recommendations to resurface with fiberglass (as well as some dissenting opinions). I'm...

:( We resurfaced our 40 year old plaster pool 4 and 1/2 years ago and about 6 months ago black rough spots began showing up. There was a five year warranty on the job...

How long can your Marbelite pool stand without water in it? I have recently purchased a house, and the previous owners got it re surfaced about a month ago. However it...

I just resurfaced my gunite pool with Fiberglass. I'm using trichlor tablets in a floater for my daily chlorine needs.

When the water was first tested there was no...

Has anyone used supersheen instead of pebblesheen? What do you think of it, my pool contractor recommends and bids it out less expensively than pebblesheen. Thanks

My pool is 18 years old and has a couple of very small (a couple inches in diameter) ablated areas. Other than that the pool is in excellent condition. The surface layer...

Can anyone refer a company that resurfaces in Massachusetts, 5 miles north of Boston. We have a 40+year old poll that emptied out this past fall and has been empty all...

I have 3 options to re-surface my concrete pool that was built in 1965. The pool size is 18x36 with 2 off sets. The pool is also 12 feet deep.

1. Pebble Tec

2....

Hi,

The plaster of the top step of my pool is blistering and possibly causing the pool leak (can't really find the leak until this problem is resolved). What is the...

We just had our pool replastered with grey plaster a month ago. We have noticed the steps and shallow end are all cracked - fine little lines that you can feel. The pool...

Have a gunite pool with diamond brite surface. Found brown stains and corrected them with simple pool solutions. However, I also have grey stains that eats the diamond...