So i am about to put down a deposit. 82 linear foot around, 8 ft deep.
chipout, bring second step out into shallow end 8' (baja shelf) with an arc for pretty-ness...

Hi all... We recently bought our first home and know nothing about pools. We have a thirty or so year old gunite pool..The surface is rough and has worn spots. Also some...

I have a idea that will give any pool a vanishing edge for less then $500-$1000. It will fit onto any conventional pool edge, above ground or in-ground. It may even work...

I live in south florida and fiberglass pools are few and far between, and so are people who work on them. Any one have a qualified contact to resurface an in ground...

We've decided to replace the problematic slate tile areound the pool with concrete.
The builder suggest stamped and colored

There are differece ways to color the...

I live in the Tucson Area. Where can I buy Pebble Tech to make my own repairs? My pool is 10 years old and I now, after reading from this site, realize that Pebble Tech...

Hi, i need to enquire as to where i can purchase marblelite for the swimming pool? Can anyone help? I'm from Singapore. Regards

I have what I believe are calcium nodule formations on the bottom and steps of my 5 year old white plaster over gunnite pool. They are raised & rough, reminding me...

I'm getting ready to break ground on my new house and I'm looking to add a pool. I'm curious to what people think of each of these types of pools; pros and cons. :?:

How much should it cost to have a 12,000 gallon pool drained, acid washed and refilled with all the necessary chemicals?

i have a 18*34 fiberglass lined over, what i believe to be concrete, pool. the pool is probably at least 30 yrs old. it has been refinished with the fiberglass lining...

I apologize if this is the wrong area to post, as i just joined this site 5 minutes ago.

The people I live with have a rectangular inground pool. None of us know the...

our pebble tec surface pool has developed a strange phenomena. We are getting white dots and white streaks running down from the dots all over the pool surface. What...

My pool maintenance company is recommending that I have them do a "marble dust" treatment. They want to charge me about $6,000 for the work and I'm trying to...

Greetings,

I am going to do a renovation but I don't know what type of pool surface to use.
The water that I use to fill the pools is high in sulfur and arson. It is...

1 year ago we repainted a client pool. Grinding old paint off and degreasing surface. From memory the ratios of degreaser to water were mixed up and the brew was to...

I have a marble plaster pool that needs resurfacing. I would like to know if its a good idea to resurface it with fibreglass?? If so, what are the common problems and...

What can be done to repair splotchy Diamond Brite which is very patchy after 6-7 years?

We recently resurfaced our pool with fiberglass and epoxy. The stairs are extremely slippery even though we used a gritty substance when doing the stairs. Does anyone...