Greetings,

I am going to do a renovation but I don't know what type of pool surface to use.
The water that I use to fill the pools is high in sulfur and arson. It is...

1 year ago we repainted a client pool. Grinding old paint off and degreasing surface. From memory the ratios of degreaser to water were mixed up and the brew was to...

I have a marble plaster pool that needs resurfacing. I would like to know if its a good idea to resurface it with fibreglass?? If so, what are the common problems and...

What can be done to repair splotchy Diamond Brite which is very patchy after 6-7 years?

We recently resurfaced our pool with fiberglass and epoxy. The stairs are extremely slippery even though we used a gritty substance when doing the stairs. Does anyone...

:? Help! I saw this pool that has a surface that looks like concrete? It's not like plaster, or any of the other coated pool surfaces like pebble tec or quartz. It just...

my pool to is 3m color quartz it look very blotchy and in the shallow end of the pool it look as if the quartz is comeing of.The pool rep said it is calcium building...

Going to paint our pool for the first time this year---the pool has been painted, this is my first time painting it--and I'm wondering about the acid wash procedure. Can...

Anyone have an issue w/blistering or bubbles on fiberglass surface? I have a 16 inch long by 6 inch wide strip of uneven "humps" going on about a foot around...

I just got my pool re-plastered and in about 3 weeks I'm getting this tan stain on the plaster. Any ideas as to what that could be?

We bought a house that had a fibertec in-ground pool. It was installed apx. 8 years ago. We have a crack down one side and a "bubble" on the service. We do not...

I am getting ready to resurface my plaster pool and can't decide whether to go with a fiberglass finish, pebble sheen, or pebble fina finish. If anyone has any...

Could anyone please give me some tips on who wo clean the pool steps which are plastic. my pool has a liner in it and these are permanent steps which have been stained....

IT has been two years and the footprints and sneaker marks are still noticeable on the bottom of the pool as is areas that almost seem bear of plaster. Should i report...

My homeowner's association pool is being replastered and the contractor who's bidding on the work has written in the bid to use something called multicoat with Metamax....

I have a 20 x 40 free form gunite pool that was built in 1985. It was resurfaced in 1998 with Marcite. It is in need of another resurfacing job. The surface is rough,...

Has anyone used Leslie's Pools Patch-it product under water. Does it work? Thanks

Have a new inground gunite pool with white plaster. Noticed a small dark spot on the wall near the bottom. Went down and noticed a small pop out hole about the size of a...

this is directed to pool professionals in the biz.

I took on a painted pool but every time I brush it the paint comes off and ends up on the DE filter elements. which...

We have a 23000 gallon in-ground pool and just had the liner replaced. When they took out the old liner, they had to do a lot of concrete work (triple the amount...