I have a problem with my in ground pool. When the pump is working it doesn’t take nor return water into the pool. The pressure is at about 30lbs. What could be wrong?...

Have a 2 HP Hayward pump. Disassembled and cleaned impeller. Now trying to put it back together and the impeller threads will not seat on the motor shaft. They are...

My pool pump is not working - was working fine and I noticed a leak by the pvc pipe and it was not working right. So when I had the leak fixed and turned on pump (primed...

looking for a direct replacement for a hayward sp1510 1hp pump. any help with this would be greatly appreciated.

I hAVE A PROBLEM WITH MY PENTAIR 320 CHLORINE TABLET FEEDER.

NO WATER IS GOING UP INTO THE CANISTER SO NO CHLORINE IS GETTING INTO THE POOL. THE PRESSURE IN THE POOL...

I have added chemicals a little to quickly and now they apparently have hardened in the pipe. is there a fast and easy way to unclog the pipe?????? Of course this...

We went to hook the pump up this yearand the pressure valve was stuck on 40. we plugged every thing up and the guage continues to stay on 40lbs. of pressure.Is our guage...

Please can somebody help. I have lots of air coming out of the first jet going into my pool. The second jet nearest the skimmer is fine. I can't get the air out of the...

I am taking care of my sister's inground pool for a couple weeks while she is away on business. We had a windstorm that blew lots of leaves in the pool. I tried to...

I am installing a water slide that requires 350 gal/min water supply. The pool is an existing gunite pool with Pebble Tec finish. The pump for the slide water supply is...

SIR, I RECENTLY HAD MY POOL RESURFACED, AND ITS TAKING SOME TIME GETTING EVERYTHING WORKING AS BEFORE. AFTER SEALING A LEAK WITH A NEW GASKET ON MY FILTER, I THOUGHT...

It could be a couple of things. If you have a solar system it could have a bad or jammed check valve. Or if you are running high pressure on the filter when the system...

When Pool shuts off the skimmer basket throws up. Meaning water comes shooting back out of it. What would cause this? :roll:

My pool was just resurfaced with fiberglass.

Prior to this, we backwashed the DE filter then drained the pool through the waste function on the multiport valve....

Well, I tightened the pressure guage a little too much and cracked the boss where it threads into the multi-port valve. Is there any way to fix this short of replacing...

Please I hope someone can help!!!!!! I am at my wits end. Last winter we left our pool open for the first time in the spring we cleaned out the leaves balanced the water...

Could somebody recommend a good pool pump. I had a Hayward that only lasted about 5 years so I'm not sure I want to get a Hayward again.

Thanks

G'day,

RE previous post concerning leaky pipe...

Over Xmas/New Year I went away on holidays. When I came home, pool was green, and the pump wasn't moving any...

I just replaced the entire pool pump and motor and glued on some new pvc plumbling lines and still the pump won't prime.The motor comes on but can't seem to send enough...

My contractor install 2 Jandy sheer decent waterfalls and he plumbed them off of the bottom drain suction. They do not go thru the sand filter and I keep getting small...