I have an above ground pool w/sand filter. The pressure is around 35 (bouncing a lot) and the water going into the skimmer is being sucked in so fast that it can't keep...

I have a new pool that has 3 lion heads on one of the pool's walls that empty into the pool. All 3 heads used to work with about the same amount of water pressure....

We have an Intex metal frame 15x48'' pool that came with a 800 gph pump. As I'm sure everyone knows, the pump/filter combo is pretty much useless. I'm looking to replace...

How can you tell if a pipe in the pool is broken.

Hello: First post here. Looks like good resource as do all forums.

My sig will show what I have:

Pump runs fine and is able to push up 10' into the solar panel....

what does sand in skimmer mean. i can not vacuum, there is no pressure and there is sand in hole of skimmer.

My pool is on a timer ,when my system shut off it blew the lid for the skimmer basket, shot water in the air.

now motor is running but there is no suction, no water...

:? Mr. Pool Wiard, I want to convert to a sand filter for my 37000 gallon inground pool and need to know what brand is the most reliable? I used a Hayward cartridge...

Issue:

There was an water and air leak in the system during the winter (I'm in Texas so the system runs all year). I knew that I wanted to replace the water and paint...

Just bought my 2nd one of these, wired per the diagram and the timer unit will not work. This will turn on the pump if I manually turn the master on switch, but the...

We purchased a 28' Doughboy above ground, deep swim pool in 2003 from dealer. In 2005 the tank developed a crack in it so we took it back and they replaced it...

All of a sudden the Spa level is lowering and the pool level is raising, which is creating a water flow back into the pool, vs. going from the spa to the pool?

I have been having a problem noticed last week when i installed a new polaris 360. DE powder is escaping my filter and clogging the filter screen on the wall connector...

I have plenty of pressure and the pipe in the skimmer nearly takes my fingers off but when i attach the pipe to the cleaning head there is an immediate pressure loss and...

I have a 22 year old ITT Marlow Argonaut two speed pump on my pool. I recently drained the pool for only the second time since it was installed, cleaned the surface, and...

i have a sand filter now and my friend gave me an older american titan stainless steel 72 sq ft de filter with a 2 hp super 2 pump. should i install this set up or is it...

my skimmer is not working. I had to drain pool to so we could replace old liner. Now the skimmer want work Can you help me

I have a spa attached to my pool and with the auqalogic set to spa the water level drops below the jets, any ideas to what the problem might be, cant call the pool man,...

the pump was running well till today. Now the visible water where the basket is fills up, pressure goes to 10 or so. then it returns back to zero. this process...

After winter, I cleaned the debris from the bottom of my pool using the skimmer inlet for suction. Subsequently, the skimmer inlet has no suction, I suspect the pipe...