My filter pressure has been running a little over 20 since I have owned the house/pool (5 years). I just cleaned out the baskets (filled with mesquite leaves and...

I don't recall ever having such a hard time opening the pump basket top or the filter top to clean the element. I have to use a rubber mallet for both or there's no way....

I have a Pentair Triton II TR 60 sand filter with side mount slide valve. I need to replace the slide valve and was wondering if I could replace it with a newer...

Hello, I will try to keep my post as brief as I can! I am a new pool owner as of Summer 2006. In the last year, I have learned more about pumps than my "pool...

I have a fiberglass pool. I think it was plumb weird when installed. Didn't have suction so called to have the line blown clear after I had tried the usual tactics....

I need to install new equipment. My pool guy tells me he will use pipe that will not freeze. Is there such a product?

hi i have a 18' x 36' pool in gound

sand filter for now

1.5" pipe

7 returns

needs to be power friendly

north star 1hp

superpump II 1hp {1 or 2 speed}...

I have just purchased a new Hayward 1600 superpump. I disassembled the impeller and housing. I tried to put the new shaft seal (the one with the spring) on the new one...

Hi all, found this forum, thought maybe a few experts here could help out.

When it first start, everything seems to be working very well -- back pressure is about...

hi i have a 18' x 36' pool in gound

sand filter for now

1.5" pipe

7 returns

needs to be power friendly

north star 1hp

superpump II 1hp {1 or 2 speed}...

I have a booster pump that runs my sweep off the filter pump. I took the pump off its stand and there was no water. Turned on booster to see if it really worked, it...

Does anyone know the difference(s) between the 2 models of the Pentair Intelliflo, besides the prices? (One sells for about 800 and the other for about $1200.)

I have been investigating a Pentair Intelliflo pump as a way to reduce power consumption. I have read the hype on the web and the Brochure, What I am looking for is...

when i vacuum the water return lines blow debris back into the pool.

I vacumed lot of leaves by way of my skimmer now i have no pressure could leaves be stuck in the pipes be fore it gets to the fillter basket i need help what can i do to...

Hi, I Have a pentair cartridge pool filter, it has all of a sudden, started wineing quite loudly. does anyone know a maintenance tip that may quiet it some???

Thanks...

Does anyone know of or have heard of the effluent water from the pump being black??

This just happened today when I turned the pump back on after back washing. This is...

Customer been having a problem with his kreepy krawley..keeps cutting out. A pool company has told him he has a leak just below the skimmer box, although there is no...

when vacuming the pool i get sand coming back in the pool... any advise at was is wrong?

My pressure always reads 10 psi when freshly backwashed. Now, it is reading 20 psi no matter how much I backwash and rinse. I can't seem to get it to go down. I just...