Good day and I will appreciate your help and advice reg right circulation pump selection.
We are engineering infinity pool outdoors with glass front wall, just for decor...

Hi forum, I recently replaced our Caretaker 5-Port Complete 1.5" Water Valve Assembly, CARETAKER SKU: 5-9-2000. To do this, I had to cut out the existing assembly,...

I recently inherited an older pool pump that is still working, and I am considering using it as a pump for my koi pond or as a backup pool pump.

The problem is there is...

Can my primary pool pump also run the DIY coil heater I'm looking to build?

I have 15' x 42" intex above-ground prism frame with 1000 gph pump. Uses 1 1/2 inch...

Hi all,
We have a 14" intex above ground pool. I built a simple solar heater using 200ft of black 1/2" irrigation line, coiled in a 4'x4' wood box with...

First, let me say that I'm not an electrician, but I thought I'd try controlling my speed pump.

There are a few controllers out there like Certikin (around £350) that...

Hi,

I've bought a new house that has a pool and I'm just learning the ropes. The pool is a 50,000l built in above ground unit with pump and sand filter. The pressure...

My family home has an old concrete pool - deep end is deeper than current allowable regulations. Hasn't been used since MAYBE 2003, more likely 2001/02. It was never...

Hey everyone. New to this board and would appreciate any advice

We are having a L-Shaped vinyl pool put in. The contractor we are using has installed other pools for...

Hi all. New here, with an issue I hope to get help with....

I have an in-ground pool with the Caretaker pop-up head cleaning system. I recently got it running after it...

i have a 10kw air heat pump pool heater
how much water is normal for me to catch in a 10 liter bucket in a day
its 30 degrees plus here and the heater is inside a...

I have a eco 10+ heater, a skimmer feeds a waterco supastream 75 pump, before going into a waterco multi cyclone 12, into a waterco trimline cartridge filter and then...

My pool pump just suddenly stopped working. I removed he back cover and discovered one of the connections had been burned and broken.

The pump is only a few months...

Hi,

I want to optimize the flow in my pluming and found a filter which I think can be operated without any multiport Valves.

Am I right that this is the most...

Hi Pool Forum,

can someone tell me if the Jandy - DEL Series 2-in-1 Neverlube Multiport Backwash is somehow able to fit on my Purex Triton FNS 36 DE pool filter?

And...

Hi,

I want to optimize flow in my pool pump area. Who ever build that pool, did a terrible job. I am starting with a question about the suction lines. I have 4 lines...

I have a pentagram 1.5 hp optiflo pump 340079.
Been working great. Shut it off to clean basket and now will not start. The motor hums but will not spin. Took apart and...

Starting to build a new pool (actually, halfway done) and having trouble reconciling piping recommendations based on GPM.

Based on what I have read, 2" piping only...

I read somewhere but can no longer find the source or name:

There is a valve that allows certain GPM to go through and anything over gets redirected (bypassed). Here is...