I have read that you run your filter pump about 8 hours a day at 80 degree temperatures. My question is, can I run my pump in 2 hour blocks? Run from 9-11. Off from...

I’ve a Stuart XB90 pool pump but need to replace the nut and outlet pipe. These are now discontinued but I wondered if anyone knew what others would fit. Are they...

I have a Pentair sand filter with a 2.5hp pool pump, I know its big but filter is located 30 ft from the pool. I bought the pump after I noticed problems with the 1hp...

We need to find a replacement o-ring for an old Hayward DE tank. The old o-ring keeps on expanding over the year. Last time when we opened up the tank, the ring was...

Hey all - my old pool heater (which was pretty old) finally had the chlorine eat through the copper. I run pretty high chlorine levels - I have an auto chlorinator....

I started up my pump for the first time this season (StaRite System3 with Hayward 1HP super pump). After a second or two of an electric humming noise and no flow, I...

Hi, has anybody had experience with putting a skimmer in an Intex above ground. Was it successful, is it fixed pipe or flexi ?

Hello everyone.
I built my own pool. But i have one serious problem. I don't know where to locate the check valve to help prime the pump. Although the pump was...

I just reviewed our surveillance cameras to see the progress on the construction of our new pool for the day and was surprised to see the plumbers leave broken...

hi, after lots of research I am thinking to buy at this point for my 6 x 4 metre concrete pool a bunch of what I think is the best gear , I want to do it right, but hope...

My timer is not installed outside next to my pump. My timer is installed in my house next to
the braker box . So I can't not easily turn on and off the pump when...

Hi there. I am going to install a new pool heater this week and like always, some PVC needs to be cut and rerouted. I am trying to identify what the importance of these...

Hi,

I'm refitting an old pool and don't want to replace the main drain but can't find a drain cover that's not metric.

Does anyone have a spare standard round drain...

Need assistance in identifying a pump (photo attached). I don't see any part numbers, but I know it's a Hayward.

I have a leak between the pump and motor. I was going...

Hi there,
What do you guys think this noise is bearings or cavitation??

Greetings. I'm currently renting a home with an in ground backyard pool. I'm looking to find out what these water outlet fitting are used for (they are in the bottom of...

I've been looking at changing my pool's return inlets to use one that can do better at directing the flow of return water. But all the options I find are threaded male...

I have an 8' round stock tank that I am turning into an above ground pool. I know most people place the outlet pump on the side of the tank, directly under the inlet...

Hi all,

I am installing a heater and relocating the pump, filter, etc. 16x32x3-6' deep pool. When I bought the house there was a pipe sticking out of the ground between...

Hi all,

I am installing a heater and relocating the pump, filter, etc. 16x32x3-6' deep pool. When I bought the house there was a pipe sticking out of the ground between...