I have a Sta-Rite dyna-glas pool pump with roughly 15 years of service on it. It developed a leak between the rear plate of the pump and the motor housing that has...

After I finished vac'ing the pool, I noticed that the prssure guage is reading very low, 3-4 psi. To chesk, I opened the air relief valve and no air or water came out, (...

I have an inground pool that had a leak from a line leading into the jet.
After replacing the hose, cracking the T and replacing that, we fixed the leak, but created a...

Hi, new pool owner at our new home. Its rectanglular and in ground. Standing at shallow end and facing pool, return is right in front of me and skimmer is on left wall....

Hi all,

What is the name of the part that screws in the hole where the wires enter the pump ?

Electrical guys say that is part of the pump and the pump guys are...

hi guys , i have a in ground pool 40000 gal, with a 1.5 hp pump and a hyward 4 cartridge filter , have 3 returns to the pool , one cascade and 3 jets that spray the...

Cant clear my cloudy pool. All chemical levels are in ideal range. i have changed the sand, water output from return is strong, i have flocced, and vacumed to waste,...

I have a Hayward CL220 Bypass auto-chlorinator that is not working properly. What I've found is that the output of the filter is forcing water back into the chlorinator...

My Jacuzzi filter is leaking out from around where the valve assembly (7-dial) bolts onto the adaptor flange. I've replaced the square ring gasket. It's not just a drip,...

I have an 11000 gal pool with a 1 1/2 hp pump and a Hayward filter system. It's about 10 years old.

I've been having problems with green/off-colored water. After...

the pool came with house, and no matter what i do i can not get the filter to be silent. it always sounds like there is air in there.

i have replaced all my...

The guy that used to open and close my pool stripped the threads that the Polaris adaptor screws into the
side of the pool.
How can I fix this?
Gunite pool by the way....

Opening pool after 3 years. Replaced bad hoses.
Won't prime.
Changed rubber gasket on motor cover. No change
When I turn the motor on a mixture of water and bubbles make...

Trying to get our pool opened. Pump works fine--it's new. But when we have it running to the sand filter, every thing stops!!! Pump is pumping virtually NO water and...

We are installing a UV system for our pool, and the manufacturer recommends a max flow rate of around 50gpm. There is not enough room to install a flow meter, but there...

When pool was opened this year, main pool pump wouldn't start, pool company found the interior switch melted, and replaced pump. 3 weeks later, my Polaris Booster pump...

Hi, I'm new to this even though we've had the pool a number of years. I have a 12 x 18 above ground pool for which I just bought new 1.5 HP filter pump. When I turned...

Hi Guys, I am new to this forum, but I hope somebody can help. Last season I noticed sand being put into the pool by the filter (Tagelus 40). So this weekend I emptied...