My sta rite crystal flo sand filter is leaking from the top. I was looking at the schematics of the sand filter on line and it looks like there is a washer under the...

Hi. I'm a pool "newbie" and just noticed that the Universal Wall Fitting is not screwed in all the way to the return line on my new pool. It sticks out and...

Last year before close up I noticed very fine sand in the pool. After research and opening the pool this year I continue to see more. Thinking it was the laterals I...

I have a 30k gallon pool. When I prime the pump the water flowns from the basket to the filter but that seems to be it.

When I put it on recuirculate nothing happens...

Hey guys, my pump strainer housing is leaking water, im not very techincal with this stuff but what im trying to say is i have the following pump

the black part...

Hey everyone,

it was really windy outside yesterday so i turned off my pool's pump. However, today when i went to turn it back on , the pump came on but no water came...

I'm having an issue with debris in my pool and I don't think the filter is filtering it or maybe something else is going on. I opened the pool 2 weeks ago, got pool...

Skimmer design (Copy).jpg Hi all.
New to the forums. looks like there is some good info here.

hope I'm posting this in the right place.

I am currently in the middle of...

I'm new to the forums and after searching, I am still unable to troubleshoot my problem.

I can't seem to get my pool vacuum working to what it was a few weeks ago....

I am constructing a small splash pool in my garden. It is rectangular, made of concrete and measures 16' x 8' x 4' which gives a volume of approx 3830 US gallons, or...

Hi there folks
I need help with a problem of high...very high pressure 35 to 40 PSI in my filter system.
The insides are new as of yesterday but I keep getting a bit of...

I have a 13 year old Viking Pools fiberglass Cape Coral pool which is 10' x 20' and holds 3,750 gallons. It is currently pumped by a 1 1/2hp Hayward Super II Pump and...

My pool pump (Sta-Rite Max-E-Pro P6EA) with an Integral Trap) has difficulty attaining the proper flow when it is started after being turned off overnight. The trap...

I'm stumped, and need help. I have a 20k gallon concrete in ground pool with 300lb sand filter. I have three suction lines: skimmer, main drain, and pool cleaner (I use...

The pool in a home we are buying has an underground pit where the heater and pump is located. The equipment is broken and I am told that the local council ( City of...

Hi,hoping you experts can guide me. I am out of idea's. I have a very large pool. It has a salt water system. Old school purex filter with the 8 or so grids that you...

Help! My DE filter's pressure is already high after 2-3 hours of service cleaning. Its at 25 psi already. I already used a degreaser to take out oils, dirt, etc. I used...

I am increasing the size of my pool deck. There are 2 PVC 1.5 inch pipes sticking up out of the ground near my pool. My pool is in Florida, in ground, about 20x30. One...

Looking for some help with my breakers.

First noticed this problem a few weeks ago. The main breakers in the garage were tripping when the pump and sweep ran for...