MY chlorinator is leaking from the top and I cannot tighten the cap all the way. I have had the chlorinator for several years and am trying to figue out how to clean the...

Hi folks fabs here. We have a kdney shaped inground pool

(aprox 80 000LT). We have the sta-rite cristal flo sand ilter and the sta-rite dyna-glas pump. The reading...

I just bought a Hayward Ultra vac and I dont seem to have enough suction to make it work. I tried using the regulator that comes with the unit but with no success. I...

We are looking for some advice on auto cleaners for above ground cleaners. Ive read a few previous threads for in ground but am interested in above ground only. We...

I am looking for a cleaner for an inground 15 x 30 kidney pool. Surface is diamondbrite. The Pool Cleaner by Poolvergnuegen formerly tracker has been recomended to me...

I need to replace 2 cement anchors for the pool cover. I've got the old anchors out and need to replace them with 2 new one. What's needed to support the new anchors in...

We Chemicly cleaned the sand filter instead of backwashing it went to filter and now it is all in the pool. Do I need to drain the pool and then start over or what can...

My Pentair CCP420 cartridge filtration was installed 6 years ago when we had the pool built. While running today, the filter was loosing water - just spewing gallons...

Hmmm thought I posted this question last night but can't find it.

Anyway I have a 24' above ground pool with no deck around it. We have a pool cover but have to take it...

Hey there!

The man (judgement reserved) I bought my house from says he changed the sand in the filter when he moved in, maybe 5 to 7 years ago. Do I need to change...

Our above ground pool is set-in to the side of a deck meaning that on one side it is basically an "in-ground" for all intents and purposes.

How do we...

I have just moved into a house with a fibreglass pool. So far so good with chemical levels etc, only problem i'm having is my Baracuda Classic auto pool cleaner keeps...

Hi All,

I inherited a Kreepy Krauly with the pool when I bought this house. I need some parts for it, and it looks like I need to know the year of manufacture to get...

I have a polaris 380 that has worked ok until now. I went to turn the boster pump on and it makes an awful noise much louder that usual. It almost sounds like it is not...

Ok, we opened our pool and my brother for got to put the cap on the filter bottom. so we changed the sand. Well when I hook the vacume up it vacumes for about 5 mins...

I just wanted to ask if anyone with a vinyl liner is using the Baracuda G4, how it works, and if you have had any problems. The disclaimer in the users guide about vinyl...

I need a drain hole cover for my older model jacuzzi filter what size are these things can I go to Lowes and buy what I want :)

Hey everyone,

I finally decided to spring for an automatic pool cleaner. It was a toss up between the Barcuda G4 and the Polaris 165. I decided that the pressure side...

Need some best suggestions on how to set this up. Bought a polaris 280 and a hayward booster pump 5060. The polaris 280 is advertised to work independently of the...

Hello

My sand filter has a crack along the top of it where you connect the 5 position valve.. A little water is comming out and I can hear some air..Any ideas what...