Hi all,

I have to drain my 1200 litre hot tub weekly. I have a drain pump but it can't drain the whole tub, it leaves about 30 litres of water in it. I have a 9 litre...

I have a laars heater on my detached spa. I turn it on via an air switch that kicks on a whisperflo booster and the heater. I also installed LED lights over by the...

Hi,
have just replaced my pump with an identical Hayward SP1611XE161, 975 watt, 4,3 amp
My timer has just gone pop, :( the one that came with the pool 11 years ago and...

Hello
New to the forum but really need some help/advise. I am replacing the motor on my pump with the same model as the existing. The motor is a 1hp 220v. I have some...

I have an American Products Company cartridge style filter with a disappeared clamp. It is the stainless steel pot, Model #564090 and S/N: 18531. The filter is...

I have taken a quick look to the forum and I dont see many automation related posts. I can´t see a proper section, so I post here.

I only want to promote a project I am...

Any thoughts on this? Just changed out the bulbs.

When I flip pump on the UV light comes on briefly so I know it has power but then the light goes out.

Other than spraying out I wondered if I could soak in a rubber trash can with some acid?

Just installed yesterday as my 1 HP WhisperFlo finally died after 14 years. I'm new to the VSF pump but it doesn't seem so complicated after a few hours of playing with...

I broke my slide valve piston handle, the piston would not turn to allow me to backwash the pool. I unscrewed the lock ring and tried to remove the entire piston. When I...

I have an Earth Elements Clean Machine robot. When you turn it on it moves forward a few feet and then just stops. The company no longer sells or supports this product...

Good morning

I have an above ground 28" pool and have yet to be able to clear the water up this summer. I have replaced the sand filter, pump and Kreepy Krauly...

For the last few years everytime the water temp gets in the 80's we consistently have algea overgrowth. Same thing happened this year . So for the last 4 weeks we've...

My Whisperflo 1 HP motor finally died after 15 years. The replacement VS pump will not be installed for another week. The summer sun is unforgiving out here in Northern...

Hello,
ISSUE # 1: I have a standard Model LAO1N booster pump for my Polaris 280. I am having a strange issue.

I ran the pump overnight and shut it off the following...

I have a 9000 gallon in ground pool that currently has a 1.5hp pump, 2” suction piping, a 24” Hayward sand filter, caretaker 5 port infloor cleaning system with 11 in...

Does anyone have a wood fired pool heater?

We just replaced our Pentair WhisperFlo single speed with a new professionally installed VSF pump (011056). It's powered directly/continuously from the breaker (not...

Hi everyone,
I recently got an AGP installed and i bought the vinyl works ladder with steps on the outside and a ladder on the inside. My problem is my yard was out of...

I’m new here and not exactly sure if I’m posting this to the correct area, if so I’m sorry.
This pool is about 30-35 yrs old. We are trying to do small things to...