Hello , I found this forum and I found few solutions but now uts little bit different.

So im in process of building a pool , I fired my "contractor" because I...

The pressure gage on the top of my Hayward cartridge filter is reading 30psi. I'm really hoping you can help : ) When I turn on the pump the filter housing bulges up...

Pumped out pool with a submersible and cleaned the pool to paint. My main drain on the bottom weeps a tiny bit of water.
My piping looks very simple by the pump. I've...

I bought a house in Dec 2019. It has a nice pool and I've had salt water pools before so was comfortable with keeping chemistry in line. There is one device that I don't...

Hi all, anyone know what this pvc cylinder is? It's got a piece of flex hose in between the pipe and the back of this thing. I have two of these, but one of the 2in...

Hi -

We just installed Hayward W3SP2303VSP MaxFlo VS Variable-Speed Pool Pump to our 18,000 gallon 2" pipe system. We have a rainbow inline top-fill chlorinator...

Hi,
I have a system where a robot is connected to a suction port with a suction hose cable. The robot is mechanical one. When the water is sucked it goes through the...

I have a Prologic PS-8 system and am having trouble with getting the display boards to communicate with the main board. I just replaced my main board (GLX-PCB-PRO) after...

Hi

I'm looking to replace the A frame in my Hayward Vac XL and I've found a used Vac Classic online for about the price of an A frame. Does anyone know if Vac Classic...

Hello,

I recently purchased an XVac Vacuum for my 15 foot above ground pool with a 1 HP motor. After installing, the vacuum continuously has the same pattern and only...

I have a Spectralight UV sanitisation System Installed By Compass pools .No luck from them
Uv Lamp blown need a new one emailed Spectra light America said do not ship...

Hi everyone,

Hoping for some help ( as a complete pool newbie!).

We live in the UK and we've recently bought a property which has a swimming pool in the garden. The...

The pressure side pipe coming out of my filter splits. 1 goes into heater then returns and goes through salt generator then goes to pool or jacuzzi. The other one goes...

New to the forum, looking for some guidance on installing a pool heater. Here is some background on my pool.

Pool Information:
-Chlorine
-Roughly 11,000 Gallons (329...

Hey everyone,

I'm installing a 12x25 fibreglass pool this summer. From what i am reading, the recommended heater size for natural gas is 100,000 to 150,000 btu. Anyone...

My older model (12+ years) Hayward began walking on one track at a 45 degree angle. Similar to when a car rides on a front and rear wheel with the other two in the air....

Hi

My insnrg salt chlorinator is leaking from where the cell lead connects. It’s spitting water under pressure and the lead seems loose. Whenever the lead is touched it...

Hi, I recently bought a home with an in ground pool. I am new to pool ownership and I have a question my pool service doesn't seem to be able to answer. there is a PVC...

I have an Aqualink RS6 system with Clormatic 3 salt controller. If I upgrade to an iAquaLink 2.0 system, will the Clormatic 3 connect properly and be controllable via...

Has anyone found a reliable winter bypass for the fusion system? Hayward is such a no brainer, but haven't found info anywhere on a Fusion. The Jandy website mentions a...