I have a Goldline Aqua Logic Controller. The control board was just replaced due to an error of "No Cell Power". Now I have an issue with...

Hello:

My Polaris 380 booster pump (I believe it is the origina PB4-60, not the Halcyon Q model) is 15 years old and has always been noisy. However,...

Hi
Boy am I glad I found this forum.. I just bought a new house and it has a Salt water pool. Goldline stuff. I don't like it at all. Water taste...

Hey all, this is my 1st post on this site. But I have a problem with my pump running when I have valves open on both pool and hot tube. The water...

We are new pool owners. Everything was running good for 2 full days. We added all the chemicals we were told to, left pump and filter running for at...

I had a small leak in my liner which was easy to repair but now I water trapped between the wall and the liner. My pool guy says I have a...

having all kinds of problems with a suction automatic pool vacuum running off filtration system. hose getting tangled up due to location of where the...

I have a Purex Triton filter and 6-way valve. The old gasket was flat on the top (and bottom). I can't seem to find a replacement gasket that is flat...

Does anyone have suggestions for a robotic cleaner?
we have had the tiger shark for 5 years and it went down.

I am new in this, so sorry if i am in the wrong spot.

My question is that does a in ground pool had more then 1 filter, or does it has more.

My...

Uploaded with ImageShack.us

I have a pool setup like this picture. I do not how to set the valves.
I have Hayward Northstar pump and hayward Star...

I have a pre 1991 Tagelus TA-60 sand filter. I need just the black handle on the top of the valve. I cannot find anything that shows if you can buy...

I have a jandy aquapure salt generator system form 2006. I started up my pool this year and soon received error codes 170 and 193. About a day later,...

I recently bought a house with a pool and need to get a fence put up quickly (for insurance).

I have found several safety fence products (Baby...

We just opened our pool this weekend and our pump (Hayward 1.5HP) is running very hot to the touch. If we shut it off and try to turn it back on, it...

Polaris rebuilt, pump backwashed, but Polaris isn't climbing walls. I've set Polaris at the 11 & 1 settings and neither help. Doesn't seem to be...

Recently backwashed our filter. After doing so, pump will only stay primed when on bottom drain. If you move to both bottom and skimmer or just...

My Hayward Navigator turns in circles until the hose gets twisted. I have replaced the feet and gearbox and I have taken it apart and verified it is...

I have a Jandy 2hp single speed pump. I have downstream of the pump, a shutoff valve and I find if I turn the shutoff valve so it's about half way...

I'd like to save some $$ on Energy running the pool pumps. Can you experts review my pool and equipment and give me feedback.

Pool:
33,000gal...