if yo uare going to spam us from the happy pool slide company, at least provide a link :thumbup:

The 2 inlets has always been plugged to allow the pool cleaner to work effectively.

Will getting a stronger pump filter help with the pressure...

I also bought a G3 after many years (and 2 pools) of using "thumper" (Kreepy) and have been thrilled by it's cleaning as well as quiet...

The pool devil works perfectly in our large in ground pool. It is everything it is advertised and more. It works great for the poplar tree fuzz and...

If you happen to be in the UK we are about to scrap one of these!

This boiler is quite frankly bloody awful. I guess it may be OK in the hotter...

Whisperflow would probably be your best bet. Many have jumped on the variable speed pump bandwagon and while this is good, is often will not apply to...

My booster pump for my cleaner does not seem to be working right... Finally figured it out because my pool had been getting pretty dirty.... I turned...

Can I replace worn parts myself?

get a second opinion from an electrician, as when a 220 motor is trying to run at 110 it will only buzz.

look at your 220 breaker switches does one...

Something I noticed is that you have a 1.5hp pump and a 60sq.ft. filter. Your pump could be trying to pump over 100gpm or around 2gpm per sq.ft. of...

Thanks for your reply. I figured out I have 115 so I changed the setting and the motor is working fine. Now my problem is a bad air leak. I cannot...

im having a filter problem... new sand, new pump, new laterals, hoses, and the spider top is replaced... but my suction cleaner will work for just a...