Something I noticed is that you have a 1.5hp pump and a 60sq.ft. filter. Your pump could be trying to pump over 100gpm or around 2gpm per sq.ft. of...

Thanks for your reply. I figured out I have 115 so I changed the setting and the motor is working fine. Now my problem is a bad air leak. I cannot...

im having a filter problem... new sand, new pump, new laterals, hoses, and the spider top is replaced... but my suction cleaner will work for just a...

HELP- i have athe exact problem, but when i have it in FILTER mode... it slows down after i have the cleaner working, whether it is manual vac. or my...

I knew there was something I didn't check :) I will check it in the morning

Thanks so much!!

Can anyone give me advice on what is the best automatic pool vac to buy for under 400?

Hi,

Are you looking for a suction side cleaner? That is the...

could be debris stuck inside by triangle flapper

could be bad flapper

bad foot pad that has gotten flat

regulator in skimmer stuck open or bad...

Edited..I'm going to try out the WFE-4. Thanks!

Hi,

Are you able to see the DE coming into the pool while the system is running? Is the DE around the main drain or mouth of the skimmer?

are they 12V or 110V lights
If they are 12V then check the transformer output
if you have 12V from the transformer then you are looking at a bulb...

thread tape