I'm in need of new filters to my Sta-Rite SM8150, so I'm seeking info on online sources. So far all I can find will run me close to $550 for the two...

We recently bought a house with an old pool, and 1/2 of the tiles are falling off. Can anyone recommend a good tile replacement product/procedure?

My in-ground gunite spa was recently resurfaced with pebble-tec and the crew "lost" my jets. I've attached a photo below (before the work...

I lookin for a non-slip pvc flooring to my swimming pool. I found this one in the internet. I found not a one yet. Sombody konw something about this?

I have a media master model 0-1702-019 sand filter.When I first turn on the pump there is good pressure exiting the water return jet into the...

Hi There,

We just had our old 24’ above ground pool replaced with a new 24’x52” Doughboy pool. I removed the old pool and pump myself 2...

Hi,

How do i replace a tile that is damaged or has fallen off? Draining the water is the last thing to do considering that our pool is a commercial...

My pool is an early 90's vinyl wall gunite bottom pool.The lamp that came out is an American Products model R-500BC,500 watt,120v,wet niche type.The...

i have a 18 round pool.everything was working fine,till i see the jet works good sometimes than other times it is slow.if i turn the pump off than on...

I think my skimmer is clogged from adding my stabalizer. I don't know how to fix or who I need to call - this is part the pump? I just cleaned my...

Which underwater light would be better to use in my pool? A 12 volt or a 120 volt light? I'm not sure what the significance would be from one to the...

anybody out there have or have had an aqua genie skimmer? With the force it pushes with does it cause a current? do they work? should i consider one?...

Hello:

I have a 16 x 32 inground. I have never been able to remove the ladder or hand rails for the steps. I have previously had to cut my winter...

We have an old in-ground gunnite pool which, at some point in the past, lost it's skimmer entirely. :( Right now we have a raw opening w/ open piping...

What percentage of clorine and acid should it be in 15gallon drums connected to feeders for a 50,000 gallon pool?

We are getting ready to install a 16'x35' inground swimming pool this winter. The last contractor that we consulted gave us a quote of $18,140.00....

Hi...new pool owner here. I am moving along the learning curve about maintaining my first pool. A couple of questions:

(1) I have two skimmers....

Ok - we have had so many problems but the one of the day is that our PB didn't install an overflow valve and we had to have one installed to keep the...

I installed a Doughboy above ground (16x28)with a 7' deep end, last summer. This past spring when I opened it up I noticed there was a small groove...

Hi. First of all, English isn't my first language, so if I am a bit unclear please apologise me.

My pool is almost new (8 months) I keep having...