Pool:Sylvan Pools Inc.
Size: 16' x 40'
Date installed: Approx +30 Yrs
Need to locate broken skimmer assy.
Skimmer lid OD 8. 3/4
Need plastic part mounted below Lid...

Hi all,
Hoping someone who can help. I have two jets on each side of my stairs and one of the faceplate to one side is cracked. Therefore leaking water to the back of...

Just opened the pool for the year and when i turn the pump on it primes good and reads about 10-12 psi on the filter gauge; it will continue running like that for...

I’m currently building a 20’ x 10’ concrete block, Inground pool, about 4’ 6” deep.
I’m not fitting bottom drains, should I fit a couple of outlets low down in the walls...

Hi! The reason why I am trying to identify this skimmer is because currently, water is only being sucked from the skimmer. This is a very old pool and it came with the...

Good day and thanks in advance for your participation!
We engineer the negative edge pool with water overflow the weir. Small pool is just for decorative purpose with...

Hello,

We drained our pool to repaint the clarity discs and stairs per the health unit’s direction.
Took a peak at the main drain cover. It appears to be screwed in...

I started down the road of getting an ICF Pool build earlier this summer, unfortunately, I ran into a bit of a scammer and was stuck out money and a hole in my yard....

My pool uses 63mm (~2.5") outer diameter ABS pipe for almost everything - including the light recesses. I have chrome-plated LED lights - similar in shape to Water...

We went on a three day vacation. Our pool is set on a timer. Our teenage son was at the house and was supposed to watch the pool levels as we have a small leak - but he...

Hoping I can get some help here. The main drain is plumbed only to the skimmer (left port) which then runs to the pump (right port). I’ve got enough bits and pieces...

Ok, I am brand new to pools. Had a concrete/plaster pool installed. Been open one month. Without getting into how, a little toy shark about the size of a small banana...

So my pool company installed a 120V light and my pool requires a 12V light.

A Pentair IntelliBrite 120V 55w light was installed. The original pool light that was 35...

Hi i purchase on Ebay two Pentair Microbrite led lights
And they missing the lights adapters and The O Rings
Anybody knows where I can buy those parts

Part # 620460

Hello. First time pool owner here. Been figuring things out over the last month and think I'm getting the hang of it, but could use some help and advise about my pool...

I have the jandy nichless led lights. I have 5 in my pool and one is now different than the other 4 no matter which light color I choose. Does anyone have a remedy or...

Hi everyone!! My boyfriends family has recently begun to open their pool for the season. Upon opening they realized the skimmer was completely cracked on the outside and...

Hello. I appreciate any input. I bought and installed a pool kit from royal pools and am in the process of wiring the light. Per my paperwork, it's a 300W 12V Astrolite...

To connect our Polaris to our pool we simply do a 'push in and turn' movement to engage a small nipple into a slot. Somehow the nipple has been broken off. Is there any...

Hi I’m hoping to get some advice on removing a light fixture from a 1970’s pool to replace it (I think that’s it’s age). Tried pulling it out and it wouldn’t budge....