Trying to get help on installing steps for my above ground pool. I have the weding cake II steps . It almost seems imposible to get the blasts in the steps. I have read...

We have an infinity edge pool and today we installed a timer on the pump so it wouldn't run 24 hours a day. After a couple of hours the pool water lever was down 3"...

I'm replacing my skimmer in my fiberglass pool due to leak at the bottom of the skimmer. No fun cutting concrete!

My current skimmer is a Hayward SP-1084, I believe. I...

Nexxus/Hayward Super Vision svSPA75 pool fiber optics light

This is a discontinued model. I have searched online but have not found anything useful.

It is not being...

How do you test in ground pool lights for proper ground and/or current leakage. In another forum I told about an electric shock received from the pool water. I have...

Hi. I need a new canister for an above ground pool thru the wall skimmer. It's a 15x30 pool and the cartridge filter is 50 sq ft. My pool is almost 20 years old and I...

Hi,

I purchased a new pool this season and it was installed in early June. About a month later I noticed rust forming on the inside of the skimmer. I contacted the pool...

I have an older inground pool. It has edges/ridges(gutters) I am not sure what the are called, that have carpet in the middle of them. Every few feet there are three in...

Please help me. I can not figure out how to turn my pool skimmer on.

Our installers pre plumbed our pool for swim jets. Can someone help provide me a schematic on how to go about installing? I'm thinking a 5 hp pump is what I'll...

Our main drain cover (642-2100) was hanging on by one screw so we had a pool repairman come out to fix/replace it. We have an in ground vacuum system and a large tree...

Hi,

The house we bought had a skimmer that was not working (one of 3 total, 2 in the pool, 1 in the attached spa). We knew we were going to remodel the backyard and put...

I noticed that the water was not swirling in skimmer. I removed the basket and, while there was some suction, it just wasn't pulling the debris in. Any suggestions?

Hi all,

To start, I'm a little new with pools so I know I messed this up... but I didn't know any better at the time.

I used an Intex plastic hose to attach to my...

I no longer use the ladders for my pool, so I have holes in my pool deck. Are there any things that I can buy to insert into these holes/opening?

Just installed new inground liner, gasket kit i ordered is different than my original. Original had gasket under liner with plastic strip (with no gasket) on top of...

hi
bought 2 new lights
installed both lights but 1 light is not working, other light is working fine
now the seller is saying its my fault the light is broke because my...

I bought a house with an older pool (20-30 years old) that has a broken drain cover.

There are no screw holes in the pool drain, the cover just slid into the drain...

Can anyone tell me where I find eyes for an older pool? When I try to put new ones in that all of the local pool stores sell they are too big in diameter to go in the...

Does a Hayward lights (same model but different cord length) have also different wire size or just the same? Example:
Hayward model:
LPCUS11030 - 30ft
LPCUS11050 -...