I recently installed a new jandy JE2400T heat pump in my shed bc I have no where else to install this monster. I first hooked it up and cut a hole in the wall leaving...

Hello, I just had my pool opened three days ago. I'm having problems with air coming from my solar panels return jets. The tiny air bubbles lasted for about four hours...

Hello everyone,

I'm having a pool built (50,000 litres, in ground) in SW Spain.

Question is this: The pump room with the connections to the 50mm heating pipes is 50m...

Just bought a home with a pool. My first pool. The pool system has 8 each, 4' X 10' solar panels on the house roof. The valving on the output of the water filter is...

Hi I have a intex Krystal clear sand filter system 6 m3 per hour which then goes to my 3Kw (2800Wt) heater !!!!!!!! As the filter is quite powerful the heater doesn't...

I have a 24' above ground pool. Removing the solar cover is a pain, and getting it back on is even worse. Quite often, I'm doing this at night after I've done chemicals...

What does it mean when you get an E05 error on the heater? I keep restarting the heater but it will give me that error every few minutes.

Any one know what is the difference between a hayward forced draft heater and an induced draft ?? I have a HID250 which is on its last legs and I have a line on a HFD250.

Hayward spa controller is tripping the 40 amp breaker after the heater is on for ten or fifteen minutes. The amp draw for the system is around 9 amps with the...

We just moved into a rental house and the spa heater has a broken housing. Is there a replacement or a retrofit.

Hi Guys I am new on here so would like to say hello to everyone on here. I hope some one can help, I have a Hayward H200 gas pool heater, it worked fine all last summer...

My MiniMax nt 400 shuts off as soon as my Cell Temp reaches the set temperature. For example if I set the desired temperature to 104-degrees the heater will run until...

I have a fairly new (6 month old) Hayward H400FD natural gas pool heater that is showing a bd error code which is not listed in any documentation I have or find online....

I have a Teledyne 400 propane pool heater for an enclosed, inground pool. Does anyone know whether there is a product made that will allow use of the huge amount of...

Hi,

thanks to all your help last year I built a small aboveground pool that has worked brilliantly and saved me a fortune. I am now looking for an economical way to...

My Pool Heater:

Purex Triton Minimax Minimax Plus Millivolt
Ser # E00298074 Model 250 M
was serviced and a fusible link was removed by the technician, for reason I do...

I have a Sta Rite heater giving some attitude.

It is the "Black Egg" model, I'm not sure of the exact model # of this one, I don;t work on very many of...

Hello,
First off great forum. A lot of great info for a new pool owner. We recently purchased and moved into a home with a inground pool and I am having an issue with my...