We are looking at a house that has a huge inground pool. It goes from 3 feet to 10 feet. The owner says he bought the house as an investment and has never lived there....

I have a problem with a crustation covering the tiles of my pool,some people say that it is the adhesive from the backing paper from when the tiles were attached and the...

Hi everyone, I'm brand new at all of this, I would like to know how to clean a cartridge filter!! or do I need to replace it!? I will appreciate any input!!! thx :P

What happens with my sand filter if I backwash too frequent? Why will the sand last less if I backwash too often?

Hi All,

We have an Intex 12' x 36" above ground pool

1,485 gallon capacity

The filter is a Krystal Clear model 604 filter pump.

We have a young baby in the...

Help! Our saltwater pool is brand new. Our landscaping was being installed recently and a heavy rain started. The landscaper had to leave and since we have no grass...

We have just bought a new house with a 36' in-ground vinyl pool. It is 40 years old and has been fairly neglected. I spent the first few weeks getting the water right...

I don't know how the vacuum hose connects to the..what? I had a pool guy out and he didn't actually show me how everything connects together. I need a diagram or some...

1) How much liquid chlorine should I apply to a 25,000 gal ground pool to shock it? (Don't want to use the Thriclor - stabilizer is getting high)

2) What is the best...

What's the best to use?

I am currently using a granule chlorine in my pool, that I buy from the supermarket, but I find it hard to dissolve when adding. I mix it up...

I have had a cover fall in, many leaves and tadpoles are in the pool and I don't know what chemicals to buy.

after removing cover net everything you can then let it...

I am looking at buying a new pool cleaner from www(dot)inyopools(dot)com. Can anyone tell me which one they think is the best to help make up my mind. I have a concrete...

Everytime I backwash my sand filter, backpressure is lower (about 0.15 psi) than the last time I backwashed. Eg, I backwash and the gauge reads 9.30 psi. The following...

Hi!

My pool is almost 1 year old and our pool constructor (it is an in-ground cement pool) told us that we could paint it again the following year instead of now. But I...

I opened some days ago for the first time my pool

I just operated my brand new pump + sand filter for the first time.

Sand came out of the return jet and made a mess!...

I have the Hayward CL200 do I need to use a check valve if there is no heater, Can the chlorine damage the pump or the control valve, also on the CL200 where the water...

Hi,

Anyone here has thier pool build by anthonysylvan? I have a question regarding equipment. I'm in dallas, tx area

Thanks!

I am getting read to have a new pool built in DFW area in Texas. I have had several proposals. Some touting Hayward equiptment other swearing by Jandy. Can anyone give...

I am a new kid on the block for swim pool, recently I have problem on the pump, it gives me a 'low flow'. I cleaned the filter on the side of pool, did back wash (no...

My first Pool is being built, mostly going ok but have had a few problems with builder, now I am concerned about something. My contract reads that my final payment is...