I have signed a contract for installation and expect construction to begin in the next two weeks. I am still up in the air regarding sanitation. The pool will include an...

I'm having a pool installed in a few weeks and just wondered what electrical amp service i need to have ready for install. It is a 1 h/p pump and gas heater. Inground...

Hello

I have a Hayward 6020 I believe that calls for 7.5 lbs of DE. Someone told me after the initial adding to only add 80% which is 6 lbs. Is this correct?? Also I...

We bought a 33' above ground pool from a large recreational company - never again. They sold us lbs and lbs of chemicals to start with. The pool was fine for 3 days...

Hello

I wonder if you can help me, I am from england and have just moved into a new house with an indoor pool...Some background...

We recently purchased a house...

Ok so here is the deal.

1.)Say you had zero TA how much would you add to a 25000 gal pool to get it in a recommended range?

I added 40lb and now on my test strip...

I need to drain 1/2 to 2/3 of my pool to address high CYA and TDS readings. My water supply is a well with limited capacity. Any ideas on who to call for delivery of...

New pool, Since the 2nd day of being filled I have little brown dirt/dust spots on the bottom of the pool. I took a brush over them and they wisp away. I took the pool...

We are currently in the process of moving into a home with a pool that has been abandon 4 2 yrs. It only has about 3 to 4 ft of water in it now. It appears to be 3 to 6...

Just moved into new house with a pool. It's my first pool so I'm waaay down on the learning curve. The pool is an odd shaped plaster type with a spa that overflows into...

I will admit first off... I don't know anything about pool maintenance or chemicals to use.

I just got a larger pool (18ft diameter circular) and I have frothy white...

We are putting in a new 15x30 in ground vinyl liner pool. We have had some installers tell us that we only need a 1hp pump and others offer a 2hp pump. Some have said...

I'm having a little trouble reading the CYA levels on a Taylor test kit. I understand you pour it into the cylinder until the black dot disappears. Am I reading the...

We are getting a pool which will use a salt generator for the sanitizer.

The water in our area is extremely hard and WILL leave white calcium deposits.

When we...

The house next to us is vacant and has been for over 30days. Bank says it will stay vacant at least through the summer. I have been given permission to watch the house...

hi everyone, :?: after putting pool rover in pool too clean it does a great job, then pool filter comes on ,after shut off of pool filter for 4hrs daytime 4hrs nightime...

the alkalinity in our pool is at 400 and ph and chlorine are also very high. I was told to put muratic acid to drop the levels but it doesnt seem to be working. What can...

I have a salt water pool but the fittings and the grout are turning gray how can I stop this from happening. I use an algaside and the P/H is 7.2 chlorine is 1.5 ppm .

Hi, I am not really a new owner of pools I have had one just about all my life. Three years ago I got my own pool when I bought my house, before it was always my...

I have been reading alot of helpful info in here, I started with th topic

"Turning your green swamp back into a sparkling oasis", which is very helpful. It...