Hi, I've had an under ground fibre glass pool for 10 years and I noticed a lot of water loss this year. It is disapearing down the tube in the skimmer so I have been...

Hello,

My pool has three metal straps running between the outriggers. Each strap is secured to a rectangular plate on each end with two 1/4 - 20 screws. Two of these...

I have an inground pool liner that has pulled away in a corner. There is a 6 ft long horizontal tear a few inches below the liner bead. The liner has pulled away from...

Hi guys
We are building a new home on Bribie island, Brisbane and are just deciding on what pool we want to put in. We are building on a canal block (M class soil) and...

Hi All! Would appreciate your input. We have a 15 ft intex pool. We are digging into the hill and spreading the clay to level it out. Then we are going to compact it....

Hello,
we had the coping installed and there were several segments that we had the fix right away because of chipping and raised areas. We have come to a stand off...

I'm in the process of buying a house with a severely neglected pool. The fiberglass walls look OK but the liner and sand are gone. The pool has trees growing in and is...

We just built a free form gunite pool. We spent so much time deciding location, shape, whether or not to do some sort of rock wall, then what type of rock, tile, etc.,...

Hello:

We recently purchased a house with a pond/water feature in the backyard. It's probably about 15 x 20 feet and about 2-2.5 feet deep and irregularly shaped, with...

Just wondering if anyone has come across a pool completely made of asbestos and coated with fibreglass? We need it removed due to safety reasons, but it has already been...

About five minutes after our gunite crew left, a hole formed in the wall when a chunk of gunite slid down the wall to the pool floor in the shallow end. I am wondering...

A couple of days after the pool was filled for the first time, we noticed an area where four or five holes or chips, over a space of about a twelve square inch area with...

Here is my dilemma, I installed an 18x33 (52in) Butressless pool 10 years ago. My 6 main posts and straps are sturdy and in very good condition, but my pool wall and...

Hello folks,
we have an 8m x 4m indoor pool which is fully functioning. It has an inconvenient semi-circular area in the pool from one long side which reduces the volume...

Hello All-

First post from someone who know very little about pools and is getting ready to build one.

I'm preparing to build an ABOVE GRADE jacuzzi and small soaking...

G'Day all pool enthusiasts!
I've been looking into building an in ground shipping container pool. 40ft possibly even putting two together to make 80ft. For under AU...

An indoor fresh water pool, 15m x 3m x 1.5m, ceramic-tiled (mesh-backed, epoxy-grouted) with a retractable cover, kept at 29C (84F). It is 4 years old.

One side of the...

I purchased a home last year that had a fibre tech finish on it. Pool looked great until we had to drain it...got consent from the pool refinisher.

He said it would be...

Hi everyone. I am building a pool for my house and I am doing it "by owner". I went to see an architect so he could design de blue prints for the pool and...