My pool has been standing idle for 5 years. it was previously operational but with rigged external plumbing. It's a total redo, the only thing that's salvageable is the...

We had a pool built in Fall of 2018 in Northern California. It immediately started leaking and we began a long back and forth with the contractor. They thought they...

Hello,

I built a concrete swimming pool by myself without the help of a construction company. Volume 51 200 liters. The construction took 75 mandays. I saved 8000 EUR....

We purchased an Aquasport 52 18' round 52" pool and are planning on installing it 3ft in-ground. We are having our landscaper excavate the hole and he will be...

OK, I've emptied my pool.

It's inground, indoor, small (16'x10' ft) and concrete. It's also around 50 years old with no leaks as far as I can tell.

We had it repainted...

I'm installing a new pool with Hayward VS pump and AquaRite salt generator. Do I need to hard wire both the pump and control panel for the generator to the breaker box?...

Hello,

I am in the process of building a house and pool. Due to climate we want the equipment to be enclosed so we don't have to winterize every year. The least...

Hi everyone, new member here. I'm in Houston TX, currently in the middle of a pool build about to pour the slab. I'm having a bit of a disagreement with my builder in...

I would like to know what I can install under my pool liner and on top of my sand, which will greatly decrease the chances of a pin whole in the new liner, from...

Swimming pool we have an old ingrown pool, the construction is rendered concrete block which as been painted.

Our plans for it are to remove a infinity edge, replacing...

I'm about to sign a contract for a pool build. The pool is 105' perimeter with a 504 sq ft surface area. This is a 3 - 4 - 5 play pool. The pool is about 16,500 gallons....

In building our travertine paver deck, our builder says they will pour a 4 inch concrete slab then place a layer of sand and dry set the pavers using polymeric sand for...

Can you use regular pressure treated 4x8 plywood from your local home building supply store, or it it a special treated wood you have to use.

Hi,

First time poster. I am having an in-ground pool installed and had the pool deck installed a few days ago. I think it came out horrible. The coping came out bowed...

Hi, I am a new member to this forum and I am hoping that other members will be able to help or point me in the right direction.
I will be starting construction on my...

So, I'm entertaining the thought of building a pool for my family and am looking for some feedback from those experienced with the process.

Some background, I am a...

I have had good success on past tile projects but this one has me a little stumped.

I am installing a 6”X12” mosaic web-backed porcelain tile at the “scum line” of an...

Doing a replastering and retiling of pool. My wife wants a wet deck/sundeck built into pool. Cost is around 7-8 thousand, is it worth it? Would I get any return on money...

Hi All

I am currently building a new 6 x 4 swimming pool in Spain. I have a specific water colour I want and I am looking for advice as to what colour mosaic tiles to...

Im a first time builder. What is the generally accepted building protocol to create a finger ledge? Does the gunite sub shoot it? Is it made by protruding a stone off of...