I have received a quote to refinish our plaster (quartz) pool. I liked talking with the company, the guy seemed knowledgeable and a straight shooter and they have good...

We will be replacing our liner and want to add corner, open top vinyl over steps. 7x7, 3 step. Looking to buy the step kit. I see these kits generally include the walls....

Hi

I recently contracted a company to build a pool for me, being that there are no regulations in my country for pool construction. You get a lot of issues.. My...

Hi all,

My parents got an indoor pool built back in 2001/2002 and ever since, the pump room has always been extremely hot, like over 40 °C (~105 °F) all year round. Our...

Hello Everyone,

I’m in the early stages of building a pool for my family. We have decided on a 12x24 or 13x26 size pool. In the plans, we have a 6x6 Spa that will sit...

Hello, we are at the beginning stages of building a pool with a contractor here in South Florida. We have ground water, and the pool company was pumping out the ground...

We are in the process of installing a Gunite 17 x 30 inground, and I am curious about the fact that the amount of water from rain inside the pool is level with amount of...

"Hi all
Hope you are fine
I'm in search of an idea to build a swimming pool in the backyard. As we all know swimming is one of the best exercises to maintain our...

Hello,
I'm pretty new to this forum but glad I found it. However, I was unable to find answer to my Question about repairing pool tiles :
* I've an in-ground pool and...

Permit Services from a Florida Licensed Pool Contractor Wanted!

Hello,

We are a general contractor company working on several single-family residential houses located...

I live in an area where there is a year wait to get a pool... I am in construction but have not installed a pool, but.. I am considering starting a pool company since...

We did a do it yourself install for a fiberglass pool & the crew that installed the pool & did the back fill told us it was level. We have already set everything...

Hello,

We have an large, old pool that we are going to have re-modeled and also add a spa. Here are the pool specs:
It is approximately 14' x 42'. The water depth in...

Hello Everyone,

I have a small inground fiberglass pool (9x18x4). To swim during the winter I enclosed the pool with a 10x20 polyethylene tent. The issues are a lack of...

This past May 2020 I contracted with my local pool company to replace the corner fiberglass steps with steel swim ledges and steps (2) at the front end of my 18 x 35 in...

Hi all. New to the forum. I will be renovating an existing inground 18x36 poly wall pool, sand bottom. This pool came with a home I purchased about 5 years ago. Its...

I’m a GC building my own pool. During excavation I hit solid bedrock between 5 and 6 feet. Since that’s the depth we want I plan to drill holes and tie the rebar and...

Hello, new to the forum and new to pool ownership. We started building our pool about 2 weeks ago. Hired a local guy who does pool excavations. All was going well until...

Hi all, first post on here as we are mid-renovation of a pool built in the 1960s - what a learning curve!!
We have quite an uneven floor surround to the pool, the shape...

Hi, went to have our coping and liner replaced from 1960s inground vinyl pool. Local reputable pool guys tried taking white white metal coping off and couldn't; cut a...