Hi.
Water was exiting through my backwash hose during filtering and there was low pressure. I was told that it was most likely a faulty valve. The valve was roughly 7 years old. I replaced the valve and the same thing is happening. Water also runs out of the backwash hose when turning the handle to a different setting. On recirculate, the pressure is fine and no water exits through the backwash hose. I'm hoping you can tell me what the problem is here because I'm lost.
Pool water exiting through backwash hose when filtering
-
- I'm new here
- Posts: 1
- Joined: Wed 03 Jul, 2019 08:00
- My Pool: 27' above ground.
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Pool water exiting through backwash hose when filtering
Replace the spider gasket in the MPV
Some people put a valve on the backwash exit
Some people put a valve on the backwash exit
Return to “Routine Pool Cleaning & Maintenance”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 11 guests