How do I raise my pH without raising my TA?
-
- I'm new here
- Posts: 1
- Joined: Fri 25 Jul, 2014 16:02
- My Pool: 20'x48" Round ProSeries Deluxe Metal Frame
Vinyl lined. 8,800 @ 90% capacity
SFS1000 Skimmer Pump - Location: Louisiana
How do I raise my pH without raising my TA?
We installed our pool 2 weeks ago and I still can't get the chemicals right. I NEED HELP!!!!!! Every time I try to raise my pH slightly, my TA goes through the roof!!! My current readings are:
TH: 0
FC: 3
pH: 6.8
TA: 180
CYA: 30-50
I'm using the hth test strips from Walmart. How do I raise my pH without raising the TA? Thanks in advance!!
TH: 0
FC: 3
pH: 6.8
TA: 180
CYA: 30-50
I'm using the hth test strips from Walmart. How do I raise my pH without raising the TA? Thanks in advance!!
-
- Pool Industry Leader
- Posts: 2381
- Joined: Thu 21 Jun, 2007 21:27
- Location: San Rafael, California
How do I raise my pH without raising my TA?
To raise the pH with no change in TA, aerate the water -- run waterfalls, spillovers, fountains, point the returns up with the pump on high, have kids splash in the water, etc.
This assumes your test strips are correct -- you should consider getting an accurate test kit, the Taylor K-2006 or the TFTestkits TF-100.
This assumes your test strips are correct -- you should consider getting an accurate test kit, the Taylor K-2006 or the TFTestkits TF-100.
-
- I'm new here
- Posts: 5
- Joined: Tue 21 Oct, 2014 20:28
- Location: Houston, Texas
How do I raise my pH without raising my TA?
Add Soda Ash to your pool. This will not make any change to the TA. I do see that the hardness level is 0 as well and there is no reading for TC. Buy AquaChek 7-Way Pool Water Test Strips for hassle free water testing.
Sam Bhullar
Engineer & Pool Expert
Sam Bhullar
Engineer & Pool Expert
-
- Pool Industry Leader
- Posts: 2381
- Joined: Thu 21 Jun, 2007 21:27
- Location: San Rafael, California
How do I raise my pH without raising my TA?
That is complete and total baloney!
Sodium Carbonate increases BOTH pH AND TA. Sodium Carbonate (aka washing soda or soda ash or pH Up) is identical to adding Sodium Bicarbonate (aka baking soda or Alkalinity Up) and Sodium Hydroxide (aka caustic soda or lye).
Na2CO3 + H2O = NaHCO3 + NaOH
Sodium Carbonate + Water = Sodium Bicarbonate + Sodium Hydroxide
Every pound of sodium carbonate in 10,000 gallons raises the TA by 11.3 ppm. When the carbonate ions (which count twice towards TA) combine with hydrogen ions (which count negative 1 towards TA) in the pool to raise the pH, the result is bicarbonate ions and these still contribute to TA.
+2 .... + -1 ---> .. +1
CO32- + H+ ---> HCO3-
Carbonate Ion + Hydrogen Ion ---> Bicarbonate Ion
Also, test strips are often very inaccurate especially for some readings and they generally do NOT test for Calcium Hardness but rather only for Total Hardness which includes magnesium which is irrelevant to protecting plaster surfaces (i.e. saturating the water with calcium carbonate). See this post for a comparison of test strips with the far more accurate drop-based tests.
If you really want to educate yourself about pool water chemistry, then I suggest you start by reading the Pool School and if you want to get deeper into the chemistry itself, then venture into Pool Water Chemistry, Certified Pool Operator (CPO) training -- What is not taught, and many other threads.
Sodium Carbonate increases BOTH pH AND TA. Sodium Carbonate (aka washing soda or soda ash or pH Up) is identical to adding Sodium Bicarbonate (aka baking soda or Alkalinity Up) and Sodium Hydroxide (aka caustic soda or lye).
Na2CO3 + H2O = NaHCO3 + NaOH
Sodium Carbonate + Water = Sodium Bicarbonate + Sodium Hydroxide
Every pound of sodium carbonate in 10,000 gallons raises the TA by 11.3 ppm. When the carbonate ions (which count twice towards TA) combine with hydrogen ions (which count negative 1 towards TA) in the pool to raise the pH, the result is bicarbonate ions and these still contribute to TA.
+2 .... + -1 ---> .. +1
CO32- + H+ ---> HCO3-
Carbonate Ion + Hydrogen Ion ---> Bicarbonate Ion
Also, test strips are often very inaccurate especially for some readings and they generally do NOT test for Calcium Hardness but rather only for Total Hardness which includes magnesium which is irrelevant to protecting plaster surfaces (i.e. saturating the water with calcium carbonate). See this post for a comparison of test strips with the far more accurate drop-based tests.
If you really want to educate yourself about pool water chemistry, then I suggest you start by reading the Pool School and if you want to get deeper into the chemistry itself, then venture into Pool Water Chemistry, Certified Pool Operator (CPO) training -- What is not taught, and many other threads.
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
How do I raise my pH without raising my TA?
I fully endorse chem geek
He has guided me in the past
You will find it well documented in this forum
To reduce TA (which seems a bit high) use Muriatic Acic (Hydrochloric Acid) to reduce it and aerate to increase PH
I have been doing this for years with excellent results after having the same problem as yours
I use a large pond aerator for convenience of aeration
He has guided me in the past
You will find it well documented in this forum
To reduce TA (which seems a bit high) use Muriatic Acic (Hydrochloric Acid) to reduce it and aerate to increase PH
I have been doing this for years with excellent results after having the same problem as yours
I use a large pond aerator for convenience of aeration
Re: How do I raise my pH without raising my TA?
both my PH and alkalinity levels are at the low end of the aquachek test strip. i have added 9 lbs of sodium carbonate. the local pool shop says to balance the PH before attempting to bring up the alkalinity. so far only the TA has gone up, PH reads 6.2. i have the pool on filter now (was recirculate) and hopefully the jets will aerate enough to raise the PH as advised by this forum... any other suggestions.. just trying to balance the pool before closing it for the season
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: How do I raise my pH without raising my TA?
Aeration is the key
Adjust the return water so that it sprays into the air, maybe fit some pipe into the jets to get it out of the water
I use a large pond aerater as my pool is covered and a thermal cover. I don't want to cool the water by spraying
Adjust the return water so that it sprays into the air, maybe fit some pipe into the jets to get it out of the water
I use a large pond aerater as my pool is covered and a thermal cover. I don't want to cool the water by spraying
-
- I'm new here
- Posts: 1
- Joined: Mon 26 Mar, 2018 19:04
- My Pool: SwimEx current pool. Capacity is 3750 US gallons. 24”x12” filter.
Re: How do I raise my pH without raising my TA?
I have a similar problem. PH was down to 6.7 after two weeks away in our Indoor SwimEx current pool with 3750 gal water.
Bromine 1
PH 6.7
ALK 89
CH 278
I used PH up until I was at PH 7.4 but Alk also went up to ALK 172, BR 3.3, CH 240 and the water went cloudy. Then I used muriatic acid to reduce the PH to 6.6 and the Alk to 78 (br 3.4 and CH 191) Then I started adding Borax and aerating the pool by running the current without the cover. I have added almost a whole box of Borax and the readings are Br 2.4, PH 6.8, CH 226 and CYA 5.
Our make up water is Reverse Osmosis which works well for reducing all readings.
How do I balance this pool?
Bromine 1
PH 6.7
ALK 89
CH 278
I used PH up until I was at PH 7.4 but Alk also went up to ALK 172, BR 3.3, CH 240 and the water went cloudy. Then I used muriatic acid to reduce the PH to 6.6 and the Alk to 78 (br 3.4 and CH 191) Then I started adding Borax and aerating the pool by running the current without the cover. I have added almost a whole box of Borax and the readings are Br 2.4, PH 6.8, CH 226 and CYA 5.
Our make up water is Reverse Osmosis which works well for reducing all readings.
How do I balance this pool?
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: How do I raise my pH without raising my TA?
Aerate
Just running your pump isn't enough, make it spray into the air or get a large pond aerator
All you are doing by adding the various chemicals is Yo-Yoing
Just running your pump isn't enough, make it spray into the air or get a large pond aerator
All you are doing by adding the various chemicals is Yo-Yoing
-
- I'm new here
- Posts: 1
- Joined: Thu 14 Jun, 2018 07:27
- My Pool: 24 foot above ground 4 foot deep, hayward de filter and 3/4 pump - solar heater attached.
Re: How do I raise my pH without raising my TA?
I am having problems getting my PH to come up, currently at 6.8 - my TA was at 180 and i did bring it down to 100- 110 using a dry acid - i have been aerating by aiming the return up into the air but the ph will not come up - i am not sure what to do next - if i keep adding dry acid the ph will drop - if i add PH plus the ta will jump.
i have only been aerating for two days - should i just continue with that process?
i have only been aerating for two days - should i just continue with that process?
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: How do I raise my pH without raising my TA?
You are Yo-Yoing with the dry acid
When aerating you have to introduce air into the water. So make a connection to your return and make it spray into the air
Like this Aerator
When you have reached your desired pH take it higher then reduce down with muriatic acid, this will reduce pH and TA
Use these products to balance your pool
Liquid chlorine (sodium hypochlorite or plain bleach)
Muriatic acid (hydrochloric acid) to lower pH and TA
Bicarbonate of soda to raise TA
Aeration will raise pH only
Soda ash will raise pH and TA
When aerating you have to introduce air into the water. So make a connection to your return and make it spray into the air
Like this Aerator
When you have reached your desired pH take it higher then reduce down with muriatic acid, this will reduce pH and TA
Use these products to balance your pool
Liquid chlorine (sodium hypochlorite or plain bleach)
Muriatic acid (hydrochloric acid) to lower pH and TA
Bicarbonate of soda to raise TA
Aeration will raise pH only
Soda ash will raise pH and TA
Re: How do I raise my pH without raising my TA?
Use BORAX (soda ash) you can buy it in the supermarket laundry isle.
If you are unsure just take a jar of your pool water test it with a test strip, then sprinkle a tiny bit of BORAX in the water then test again. Your Ph will go up but the alkalinity will not . Cheap and safe. Keep in mind every time you add Algaecide it lowers your PH
If you are unsure just take a jar of your pool water test it with a test strip, then sprinkle a tiny bit of BORAX in the water then test again. Your Ph will go up but the alkalinity will not . Cheap and safe. Keep in mind every time you add Algaecide it lowers your PH
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: How do I raise my pH without raising my TA?
jean9 wrote:Use BORAX (soda ash) you can buy it in the supermarket laundry isle.
If you are unsure just take a jar of your pool water test it with a test strip, then sprinkle a tiny bit of BORAX in the water then test again. Your Ph will go up but the alkalinity will not . Cheap and safe. Keep in mind every time you add Algaecide it lowers your PH
I'm sorry but you are writing rubbish
Return to “pH & Total Alkalinity”
Who is online at the Pool Help Forum
Users browsing this forum: Ahrefs [Bot] and 14 guests