I am a new pool owner and sure don't know what's going on. I hope I am posting in right place.
I have a salt water pool with only pebble tec on the interior (no tile). The pool builder gave me a nylon brush to scrub the walls of the pool but it hasn't cut it. I went to a pool store and they said to use this combination brush (stainless and nylon bristles, I think) Bottom line is that I tried to use it around the water line and while it was an improvement over the nylon brush it still isn't getting all the staining off at the water line. I have only had my pool filled for about 3 or 4 months.
Can anyone tell me how to get the discoloration at the water line off?
Thanks!
Pebble Tec Pool Help
Water line problem
Is the staining rough or is it more like a scummy dark line?
If rough, then you probably have a scale problem, which is often the result of raised total hardness from the increased salt content in the water.
If it is a dark "tarry" layer, you can find many products to remove the built up oils which cause the line.
If rough, then you probably have a scale problem, which is often the result of raised total hardness from the increased salt content in the water.
If it is a dark "tarry" layer, you can find many products to remove the built up oils which cause the line.
Return to “Pool Surface Staining & Discolored Pool Water”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 7 guests