Submersible? Winter water getting high

[mknmike]

My pool guy suggested maybe putting a sump pump on the top step. I dropped the water really low, but I think the pool is nearly filled to the tile already. Not good with potential freezes coming.

Any suggestions for submersibles to put on the top step?

[mknmike]

So choosing a pump to buy (perhaps usable for other things too??) and putting it on top of something to assure I don’t stain the pool sounds like a good idea.

Of course there’s also the option of using something other than a submersible too.

https://www.troublefreepool.com/wiki/in ... ible_Pumps

[Teapot1]

Your pool guy should have suggested fitting the overflow from the skimmer to a drain path.
Sadly not all pool guys are created equal.
No pump, no electrical connection.

[mknmike]

Your pool guy should have suggested fitting the overflow from the skimmer to a drain path.

“Overflow from skimmer” to a drain path? I have no idea what an “overflow from skimmer” is or how my pool guy could have possibly configured it to a drain path. It sounds ideal if you can have any water that reaches the tile level to drain via gravity, but the skimmer is next to a small garden that is below everything around it including the pool, driveway, garage, and raised garden. Maybe trenching out the nature garden to get to a drain near the house would be ideal.

Sadly not all pool guys are created equal.
No pump, no electrical connection.

I guess you are a pool guy that thinks he’s better than others. :smileyface:

[Teapot1]

Don't be ridiculous, I know I am better because I do the job properly. I understand more about the chemistry, I understand more about the hydraulic circuit and filtration but also running pools with a 90% saving in electricity.

[mknmike]

So it sounds like you are trying to say there’s a method by which my pool can be drained with gravity to assure that my ~60 year old pool is not going to pop tiles during the winter, and it’s a better way than just dropping a submersible in to drain the pool if the water level gets too high?

There is a gravity drain that’s about 1/4-1/3 the way up the tile, but that’s too high in my opinion.

Also, to have water and or ice at the level where the skimmer can collect water, wouldn’t I risk at least popping the tiles at the bottom of the skimmer inlet?

If I was going to design a gravity drain for the pool, I personally would put it lower than the skimmer in my pool. I think it would require a lot of digging too.

My pool guy has charged me less than $1000 in the two years I’ve owned a pool. He’s offere to rebuild the deck of the pool, but it doesn’t seem necessary to me. Does that make my pool guy not as good as you? His family has been doing this business for longer than I’ve been alive. I believe he knows what he’s doing, even if he’s not as good as you.

[AllPoolSlides]

Learn the Swimming Pool Cover Secrets
that your Pool Guy Will Never Tell You

This guide will explain all the details for the best way to install your pool cover:
https://swimmingpoolslides.net/poolprod ... guide.html
Most Important Pool Cover Factors to Consider
# Cover Type

# Proper Cover Size
# Best Installation Method
In Order To:
# MAXIMIZE & MAINTAIN POOL SEALING !
# MINIMIZE POTENTIAL COVER DAMAGE !
# EXTEND USEABLE COVER LIFE !
# QUICK & EASY SPRING OPENING !
THE BEST TYPES OF
Winter Swimming Pool Covers
This might also be of a great help for properly closing (Winterizing) your pool for an EASY, trouble free Spring Opening:
https://swimmingpoolslides.net/poolprod ... guide.html
Do it Yourself
Winter Pool Closing Guide =>
Complete step x step instructions
for properly Winterizing
and Closing your Swimming Pool.