Pentair ic20

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
Pool Enthusiast
Pool Enthusiast
Posts: 29
Joined: Sat 11 Jul, 2009 12:53
My Pool: new 14x31 fiberglass pool sand filter with pentair
chlorine generator model ic20.Chlorine will not
register when tested it shows salt content is good
water test showed no calcium water is very clear.
I am at a loss with this please help.
Location: arkansas

Pentair ic20

Postby kturner » Sat 16 Jun, 2012 18:13

My ic20 low salt light has no reading at all i know they can go off during
cycles but its staying off.all other lights are green i did add some salt
my salt strip reads 3400.i took some water from directly out of the jet and
reading good chlorine level there but a .5 or so just in the middle of pool.
Anyone got any ideas?

Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot], Google. [bot] and 2 guests