I had replaced my new 24” round above ground pool liner with a unibed liner. I live in MA and this was completed on Tuesday in 80+ degree weather. I filled with about 12” of water let it sit over night and started filling again this morning. The pool is about 1/3 filled and the temp is dropping and it is supposed to drop fast tonight down into the 30s. Is it better to leave the pool 1/3 filled or finish filling it in the cold weather?
The weather was hot pretty since Friday and the day after install it’s dropping to 30* overnight and will be a high in the 60s the rest of the week.
Any help would be greatly appreciated.
New liner install how to fill with water
-
Tom18202
- I'm new here
- Posts: 1
- Joined: Wed 17 May, 2023 17:56
- My Pool: 24’ round above ground pool. Hayward DE filter
-
Teapot1
- Swimming Pool Superstar
- Posts: 909
- Joined: Thu 29 Apr, 2021 00:43
- My Pool: 12000 gallons vinyl liner,
Re: New liner install how to fill with water
Just keep filling.
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.
Return to “Liner & Above Ground Pools”
Who is online at the Pool Help Forum
Users browsing this forum: CommonCrawl [Bot] and 2 guests