Attaching wall foam to a cement block wall inground pool

Liner issues and problems installing or
maintaining above ground swimming pools.
mcmike4817
I'm new here
I'm new here
Posts: 2
Joined: Sat 08 Aug, 2009 20:11
Location: michigan

Attaching wall foam to a cement block wall inground pool

Postby mcmike4817 » Sun 09 Aug, 2009 14:17

I have an inground pool with cement block walls. I want to attach wall foam to the walls and I'm not sure what the best way is to secure it to the walls. I don't think adhesive spray will work or duct tape. Some mentioned liquid nails, but I'm sure about that either. The walls are pretty dry but porous. Any help would appreciated

Mike


Vinyl Master
Pool Enthusiast
Pool Enthusiast
Posts: 23
Joined: Thu 16 Jul, 2009 20:21
Location: Ontario, Canada
Contact:

Attaching wall foam to a cement block wall inground pool

Postby Vinyl Master » Sun 09 Aug, 2009 16:49

I have tried lots of different types of spray adhesive . I have used it on a product called insul-wall the same idea as the foam but more like a thin solar blanket material with a tinfoil side. Try to find lapage 77 super spray adhesive. spray it on both sides let it tack up for a couple of minutes then press together. If This spray adhesive dosen't work no spray adhesive will. In Canada it is available at home depot.

Return to “Liner & Above Ground Pools”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 5 guests