I have a problem when the pump goes off .
Every after noon when the pump goes off ,the skimer basket and the lid gets pushed out of the skimer because of back water pressure .
Rest of the time evrything is fine .
I have a cartridge filter
When the pump is running I have 14 psi .
I tryed to run the pump without cartridge inside the filter ,the pressure is 13psi without cartridge ,and when I turn off same thing .
I noticed if I run the pump 30 minutes ,nothing happen but after 1 hour I get a lot of water coming out of the skimmer lifting up the lid and turning the gasket over .
The next mornoing ,it take for ever to prime the pump.
I guess the pump suck air somehow
Please let me know if you have any idea
Thank you
water pressure lift up the skimer lid
I found the problem .
I have a VISION AUTOMATIC WATER PURIFIER .At the bottom is a control valve to adjust the flow .the valve has a bypass position to change the cartridge .
Since a own the house ,I (and the previous owner)never used the system and the valve is on bypass position .
My guess is the valve went bad alowing little bit of water going in the VISION AUTOMATIC WATER PURIFIER but not enough to go out making air pocket inside the cartridge and release it when the pump goes off .
Is it possible ?
It's working fine now .
I have a VISION AUTOMATIC WATER PURIFIER .At the bottom is a control valve to adjust the flow .the valve has a bypass position to change the cartridge .
Since a own the house ,I (and the previous owner)never used the system and the valve is on bypass position .
My guess is the valve went bad alowing little bit of water going in the VISION AUTOMATIC WATER PURIFIER but not enough to go out making air pocket inside the cartridge and release it when the pump goes off .
Is it possible ?
It's working fine now .
Same problem
I have the exact same problem as the original poster. Everytime the pump shuts off the skiimer basket and lid shoot up in the air.
I have looked everywhere for an air leak and cannot find any.
Everything started when I replaced my filtering cartriges. I re-openned the filter to make sure they were properly instaled and they seemed fine. I also replaced the pressure valve and gauge. Please help, it is very frustrating to have to prime the pump every time. I had to disablethe automatic switch.
Thanks in advance.
I have looked everywhere for an air leak and cannot find any.
Everything started when I replaced my filtering cartriges. I re-openned the filter to make sure they were properly instaled and they seemed fine. I also replaced the pressure valve and gauge. Please help, it is very frustrating to have to prime the pump every time. I had to disablethe automatic switch.
Thanks in advance.
-
- Pool Enthusiast
- Posts: 26
- Joined: Wed 19 Mar, 2008 19:12
- Location: Atlanta
Return to “Swimming Pool Leaks”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 4 guests