Fiberglass or gunite???

Tile, mosaic, marbelite, Marcite, Marblesheen,
fiberglass, plaster, shotcrete, paint, epoxy coatings.
Use, care and repair of the various surfaces.

Fiberglass or gunite?

Postby Guest » Mon 27 Feb, 2006 17:11

the warranty on the fiberglass is the life normally 5 years of the gel cote at least from my suppliers here in florida and gel cote will oxadize just like a boat or any thing else that sets in the water gets chemicals on it chlorine bleach acid ect so thats another thought that you may wanna take into concideration if you have a gunnite/shotcrete pool put in and have clay or anything like that in the ground or just want to be sure have them put a well point in they can suck any water that may pop the pool up out of the groung marcite or pool plaster usually lasts ten or more years before it as to be replaced have the water that goes to the pool go through a softner system and pool surface can and will last longetr further more pool plaster is a aggrate like concrete so it is gonna last

Pool user

Fiberglass or gunite?

Postby Pool user » Tue 15 Aug, 2006 20:36

I've had two concrete pools. I'm really, really tired of the maintenance and expense. Time and effort increase dramatically as the pool gets older.

My plan is to go with a fiberglass pool and a salt water chlorine generator.

I'm getting to the point where I want easy maintenance and from everything I've read modern fiberglass is the way to go.

These guys who say gunite is the only way to go must be pool builders!

Fiberglass cs Gunite

Postby Retiredpoolinstaller » Fri 16 May, 2008 17:36

I have retired from the pool business. Over the years, I have installed hundreds if not thousands of pools. I have installed Gunite, Fiberglass, Vinyl Liner and Fiberglass wall with concrete bottom. As a pool owner, I have had Gunite and Fiberglass.

I installed my first fiberglass pool in 1999 and have never installed anything else since then. They are very easy to maintain, last forever and if in fact you damage it, repair is extremely easy. Just like a boat gelcoat repair. As for chemicals, all the chemicals used in pools are stored in fiberglass tanks because they do not damage fiberglass. If I had to make a list of the repairs that I have made on pools, after installation, I would say that I have made between 10 and 15 repairs on other types for every repair I've made on Fiberglass. I have NEVER seen a structural failure on a fiberglass pool anywhere.

All that being said, every family, in every situation needs to pick their pool based on their needs and in fact I will say Gunite, fiberglass and Vinyl liner pools are all good pools if installed and cared for properly.
watertite pool repair

fiberglass v gunite

Postby watertite pool repair » Tue 20 May, 2008 06:24

I have been in the pool racket for eight years and fiberglass for twenty.

some of the above comments are right on but some are absurd. i have

fixed alot of pools mainly fiberglass because thats the business I am in.

I have seen about every disaster out there from manufacture ill work to a

contractor who just came from installing septic systems to home

owners who did'nt bother to get the what if information. the gentleman

who thinks he's not bias is. todays fiberglass pools cannot be

compared to those of the past because of the technological advances in

the construction materials and the fact that you have to maintain a high

level of quality to stay in the business as for concrete i dont really know

how far it has advanced in the past twenty years. Yes it can be

expensive to repair fiberglass but you can, concrete not so much you

replace. Also the fiberglass does come as large as 16x42 and every

manufacture has one. Do'nt lose your ass get a fiberglass.
Duffy Pools

Postby Duffy Pools » Fri 30 May, 2008 22:28

I would go with a liner pool. End of story. Period no argument.
Duffy Pools

Fiberglass or gunite?

Postby Duffy Pools » Fri 30 May, 2008 22:40

I would not ever think of installing a fiberglass shell Pool in New England or any place that has winters.

The best pool ever built was a 10 inch reinforced wall foundation with a sand based bottom and 18 gauge liner. Best deal in the long run for your money.

If you get sick of the pool you can build a house on it. Basement included!
I'm new here
I'm new here
Posts: 1
Joined: Mon 14 Jul, 2008 15:57

Definitely Fibreglass...

Postby jooste » Mon 14 Jul, 2008 16:20

Why a fibreglass swimming pool?

- quick and easy to install
- can last a lifetime and are guaranteed for 10 years
- require less chemicals than concrete pools
- quick and easy to maintain
- non-slip finish
- surprising strength
- no mosaic tiles needed as there is a built in tile band

Click here for a comparison on:
Fibreglass, Concrete and Vinyl Liner Pools.

Quality Pool Supplies

Fiberglass or gunite?

Postby Guest » Wed 24 Sep, 2008 11:19

We had a sanjuan fiberglass pool installed in 1994. It is 42x16. We live in a harsh environment - Salt Lake City, and the pool has been fabulous these past 15 years! We swim nearly every day May-October. There have been NO issues whatsoever with our pool. It is soft and comfortable, easy to clean and uses very little chemicals. We keep it heated at 89-90 degrees. No acid washing, no scratched up feet. My only regret is that due to transport, the widest fiberglass pools are just 16 feet. With our diving board, I wish the pool was 20x40.
Pool Dreamer

Fiberglass or gunite???

Postby Pool Dreamer » Wed 03 Jun, 2009 13:54

Great feedback on the different options. I live in Salt Lake City as well and would be interested to know who installed your San Juan Pool.
Swimming Pool Superstar
Swimming Pool Superstar
Posts: 401
Joined: Sat 16 May, 2009 09:20
My Pool: 16 x 32 gunite21000 gal., Diamond Brite Blue, Swimquip XL pump, DE36
Location: Texas

Fiberglass or gunite???

Postby czechmate » Thu 04 Jun, 2009 07:54

There is lot of information here ranging from heavy bias across sales pithes to flat wrong and misleading.
First of all, properly designed and built gunite will not break. Pear shape with extra 5/8" rebar on bottom may settle 1/2 -5/8" in the deep in a Texas black clay, while "L" shape may crack due to extreme difference in weights in shallow and deep. People have of the wall ideas on the freeform and builders protected by the ground settlement clause will built anything to get the job.
Second myth presented here by the fiber lovers is, that plaster need to be replaced every 6 years.
That is unsuported flat lie from a very irresponsible layman.
I just replastered my gunite first time after 25 years of perfect service with a Diamond Brite.
It is not unusual for plaster to last 30-35 years. The new aggregates like a Diamond Brite applied to a fresh new gunite and maintained properly should last 25-30 years easy. It's surface is much harder and chemical and algeae resistant than anything that existed prior to 1990.
As for comparing the cost,feel, looks and maintenance, I will not go into that.
It is senseless to recommend BMW X5 for its handling and looks, to someone that has only enough for a Saturn VUE and must have all maintenance done by a dealer.
All I can say is, that years ago, when buying a house I turned down a gorgeous house with a fiberglass pool for a one where I designed and built gunite pool myself.
Of course as a construction guy, I did the contracting an saved about 30%, plus equipment at wholesale.

Return to “Pool Surface Discussions”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot] and 1 guest