My pool is currently drained...
My swimming pool has ceramic tiles at the water line. Over many years, mineral deposits have formed on the tile surface. I have decided to use "Walnut Shell Sandblasting Medium Grit (10 lb. per Box)" and a media blaster gun (along with an air compressor).
I was warned not to use sand because it would mar the glossy surface of the tile, so I got the softer walnut shell particles. Was I given good advice?
I have no idea if I have enough of the walnut shell grit. I would like to blast for as long as the 10 lb box lasts, then sweep it up and do again. Will that work or will it be pulverized too much?
restoring swimming pool tile
-
GreenWater
- I'm new here
- Posts: 2
- Joined: Fri 20 Sep, 2019 22:12
- My Pool: In ground pool with stucco. About 12,000 gallons.
Kidney shaped.
diatomacous earth filter (which I need to replace).
Return to “Pool Surface Discussions”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 5 guests