Pump motor and impeller right configuration

Pool pumps, pool filters and the plumbing of
swimming pools. Sand filters, cartridge filters,
fabric filters and alternative filter media.
djfesta
I'm new here
I'm new here
Posts: 1
Joined: Wed 10 Oct, 2018 16:53

Pump motor and impeller right configuration

Postby djfesta » Wed 10 Oct, 2018 16:57

Dear Pool experts,
I need help with the following:

I have a rectangular pool of 11,000 gallons and recently the motor of the pump went bad. The specifications of the motor are 1.5HP - SF: 1.1 - Total HP 1.65. Then I checked the impeller part number and I noticed it is a 0.75HP. That surprised very much and now I am confused what would be the right parts for my pool pump.
I will provide you all the parts numbers of the pool pump parts, if you can help me to determine what would be the right mix for the impeller and motor. I am looking for the more energy efficient alternative without over spending.
I was thinking that if I had an impeller of 3/4HP and a motor of 1.5HP- my logic says that switch to 1.1 total hp motor and 1hp impeller would do perfect fine and I would save money on my electric bill. I am wrong or right?

Motor Name Plate Info:

US MOTORS - CAT. NO. EUSQ1152 – MODEL C55CXKLT-5007 HP 1.5 SF 1.10 RPM 3450
Volts 230/115 HZ 60 - AMPS 8.5/17.0 - Frame 48Y

Housing Sta-Rite: Self Priming = MPRA6G-155L

Impeller C105-236P

Filter: Sta-Rite posi-flo II pool filter MODEL PTM135

thank you in advance
Diego festa


Return to “Pool Pumps, Filters, Plumbing & Piping”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot] and 1 guest