Hello,
We have a new build 16x40 Fiberglass pool. Unfortunately our builder ghosted us in the finishing stages so we are on our own. We got all the equipment hooked up today and I was vacuuming to waste for about 5 minutes when the pump shut down and tripped the breaker (Super Pump VS 700, Variable-Speed Pump). I reset the breaker and power is now going through again but the pump wont turn on. The display turns on then right back off again with nothing displayed, just the backlight come on then off.
Any ideas?
Did I fry my pump after 5 minutes!
Thank you.
Hayward Pool Pump Display Flashes on/off
-
- I'm new here
- Posts: 2
- Joined: Mon 17 Jun, 2024 14:38
-
- Pool Industry Leader
- Posts: 1345
- Joined: Thu 29 Apr, 2021 00:43
- My Pool: 12000 gallons vinyl liner,
Re: Hayward Pool Pump Display Flashes on/off
Should be under waranty despite the PB running away like the child they are. Contact Hayward directly.
I may not give you the answer you want to hear, but I will give an honest opinion of your situation as you decribe it.
-
- I'm new here
- Posts: 2
- Joined: Mon 17 Jun, 2024 14:38
Re: Hayward Pool Pump Display Flashes on/off
Teapot1 wrote:Should be under waranty despite the PB running away like the child they are. Contact Hayward directly.
No that is fine and the route that I'm going. Super frustrating. Thanks for the advice.
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: CommonCrawl [Bot] and 10 guests