Pumping water from the sump

Pool pumps, pool filters and the plumbing of
swimming pools. Sand filters, cartridge filters,
fabric filters and alternative filter media.
Terry chancellor
I'm new here
I'm new here
Posts: 1
Joined: Thu 29 Sep, 2011 04:00
My Pool: Size 5m by 10m Depth 1m to 2.25m. Liner. built in rock. 2 skimmers, sump and vacuum. french pump.
Location: Hertfordshire

Pumping water from the sump

Postby Terry chancellor » Thu 29 Sep, 2011 04:37

I recently had an engineer to build a septic tank in France. He also ripped up the pipes for the pool. I had the pipes repaired and the vacuum and sump worked ok, but with some air showing. I drained the pool for the winter so it is now half full. I then discovered another tiny leak. I now need to pull water from the sump to test every thing, but it only pulls air. Can this be done or is the water level too low.

Return to “Pool Pumps, Filters, Plumbing & Piping”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot] and 1 guest