Pressure goes up and then drops.

Pool pumps, pool filters and the plumbing of
swimming pools. Sand filters, cartridge filters,
fabric filters and alternative filter media.
Jynxus
I'm new here
I'm new here
Posts: 2
Joined: Sat 11 Jun, 2011 09:19
My Pool: Is an onground pool with a 6' deep end. The bottom drain was closed off when I had kids with long hair. I add everything into the skimmer. My husband always looked after the pool and I swam in it. I lost my husband four years ago to a massive stroke and this pool is a real mystery to me.
Location: Ontario

Pressure goes up and then drops.

Postby Jynxus » Sun 08 Jun, 2014 11:42

My pool pump was working fine until I vacuumed it the last time. Now, it won't hold the prime. I undo the lid on the basket and it fills with water. I replace the lid, turn on the pump, the pressure gauge goes to about 14 and then drops right down and stalls. I am a real beginner to all of this. My son usually looks after it, but I am attempting to regain my independence. The pump is a TS Series (TS 100). The water in the pool won't fill past the skimmer.


Denniswiseman
Pool Industry Leader
Pool Industry Leader
Posts: 2594
Joined: Tue 06 Sep, 2011 05:48
My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
Location: United Kingdom

Pressure goes up and then drops.

Postby Denniswiseman » Tue 10 Jun, 2014 05:25

Hi

It seems that you are sucking in air
Lubricate the "O" ring on the pump basket lid with Vaseline or Silicon grease, this will enable you to tighten the top more securely (you may need to replace the "O" ring)
Check for cracks in the lid or adjacent pipework
Check the skimmer flap isn't stuck upright
Check the water level at the skimmer, do you mean that you can't add any more water to the pool to raise it past the skimmer

Return to “Pool Pumps, Filters, Plumbing & Piping”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 28 guests