Loosing Presure
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Loosing Presure
Hi,I am loosing pressure on my return pipes and kreepy,I already replaced the pipe from the pool to the pump,al the pipes between the filter and pump,new wagon wheel,new sand and new speck pump,it runs for 3 min good and the start loosing pressure until the kreepy stands stil.I unplug the kreepy the then the pressure starts coming back again.I have spend a lot of money but cannot find the problem,PLEASE HELP.
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Loosing Presure
You are sucking in air under the vacuuming load
Does the pump strainer basket have air in it when it stops working?
Check the "O" ring on top of the pump strainer basket and lubricate it with silicon grease or Vaseline
Your vacuuming hose could also have a split in it
Does the pump strainer basket have air in it when it stops working?
Check the "O" ring on top of the pump strainer basket and lubricate it with silicon grease or Vaseline
Your vacuuming hose could also have a split in it
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
The stainer is full of water,little bit of air like normal.can i block the weir and return pipes to see for any leaks?
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
Hi,when i switch the pump of the stainer basket is full of water.
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Loosing Presure
You need to look in the pump strainer with the pump still running when the Kreepy stops working to see if there is air in it which seems the most obvious
Have you tried lubricating the "O" ring?
Can you try another vacuum hose?
Have you tried lubricating the "O" ring?
Can you try another vacuum hose?
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
I will try a other vacuum hose,i see after i backwash for 10 min and rinse 4 min there is still brown water comming out from the return,what can cause that?I s my 3 months old sand already clogged.
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Loosing Presure
I very much doubt that there is a problem with your sand
I don't know why you are getting the brown water back into the pool unless you are doing something wrong
Have you tried what I previously suggested first
I don't know why you are getting the brown water back into the pool unless you are doing something wrong
Have you tried what I previously suggested first
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
Not yet,will try it when i get home,Will let you know.Thanks
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
Morning,i have put a other vacuum hose and kreepy in,still the same,i have checked the breeder pipe again and still fine,stainer is full of water and no air and still i loose presure.
-
- Pool Industry Leader
- Posts: 2594
- Joined: Tue 06 Sep, 2011 05:48
- My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
- Location: United Kingdom
Re: Loosing Presure
The fact that the filter and pump run normally when not vacuuming indicates that air is being sucked in under the vacuuming load
If you are unable to find this I suggest you employ a professional or some one local who can look at your setup and advise
What I have suggested I find cures this problem
If you are unable to find this I suggest you employ a professional or some one local who can look at your setup and advise
What I have suggested I find cures this problem
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
Hi,some professional pool company is coming out today to have a look whats going on,I hope they can solve this problem.
-
- Pool Enthusiast
- Posts: 11
- Joined: Thu 14 Apr, 2016 04:23
- My Pool: Speck pump 0.75,in ground pool,11x4 meters,3 bag filter.solar heating
Re: Loosing Presure
Okay,it seems like the problem is in the filter with the fingers,i had last year a problem with blue 52,my filter sand was sticky and i had to replaced my sand.
Return to “Pool Pumps, Filters, Plumbing & Piping”
Who is online at the Pool Help Forum
Users browsing this forum: No registered users and 22 guests