Too much water coming out of pump

Pool pumps, pool filters and the plumbing of
swimming pools. Sand filters, cartridge filters,
fabric filters and alternative filter media.
Bun
I'm new here
I'm new here
Posts: 1
Joined: Thu 13 Jul, 2017 06:37
My Pool: Above ground 12 ft pool, with sand pump

Too much water coming out of pump

Postby Bun » Thu 13 Jul, 2017 06:40

My pump wont start and when I take off the pump lid water rushes out. I have not idea why. Please help!


Denniswiseman
Pool Industry Leader
Pool Industry Leader
Posts: 2594
Joined: Tue 06 Sep, 2011 05:48
My Pool: 10k inground fibreglass, Telescopic Cover, Hayward Powerline pump, Quality filter with glass media, 27kw output heat pump, K-2006C test kit
Location: United Kingdom

Re: Too much water coming out of pump

Postby Denniswiseman » Fri 14 Jul, 2017 03:37

Because your pump is below the water level, water will flow out when you remove the lid
Check there is power to the pump, a breaker may have tripped.
It could be a bad capacitor
Otherwise you will need an electrician or a new pump
luv2lagh
I'm new here
I'm new here
Posts: 7
Joined: Fri 14 Jul, 2017 16:11

Re: Too much water coming out of pump

Postby luv2lagh » Fri 14 Jul, 2017 16:11

Send a picture of what pump you have.


Sent from my iPhone using Tapatalk
luv2lagh
I'm new here
I'm new here
Posts: 7
Joined: Fri 14 Jul, 2017 16:11

Re: Too much water coming out of pump

Postby luv2lagh » Fri 14 Jul, 2017 16:14

Your not supposed to turn on your pump without lid being on. Because your pump needs a tight suction in order for it to pull the water through.


Sent from my iPhone using Tapatalk
luv2lagh
I'm new here
I'm new here
Posts: 7
Joined: Fri 14 Jul, 2017 16:11

Re: Too much water coming out of pump

Postby luv2lagh » Fri 14 Jul, 2017 16:15

To stop water from rushing out you need to shut off valves to the pump located on the pool.


Sent from my iPhone using Tapatalk
luv2lagh
I'm new here
I'm new here
Posts: 7
Joined: Fri 14 Jul, 2017 16:11

Re: Too much water coming out of pump

Postby luv2lagh » Fri 14 Jul, 2017 16:17

But remember that you have to turn them back on (the pump valves) in order for water to get to pump and push through to get back to pool.


Sent from my iPhone using Tapatalk
luv2lagh
I'm new here
I'm new here
Posts: 7
Joined: Fri 14 Jul, 2017 16:11

Re: Too much water coming out of pump

Postby luv2lagh » Fri 14 Jul, 2017 16:18

Some pumps have a rest button on the plug part. Depends on what pump you have . So look at your manual. If you don't have look it up on YouTube.


Sent from my iPhone using Tapatalk

Return to “Pool Pumps, Filters, Plumbing & Piping”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 24 guests