Intex Pipe Coversion

[steveyg_uk]

Hi,

Very new to pool ownership. My setup is the smallest you have been probably seen - living in UK - not much space I have 10ft Steel Pro pool BESTWAY POOL with A and B nimble that 32mm hoses attach. too.

The current pump I have is a Bestway Sand Filter 500gal, doesn't provide much suction, so I can't use a skimmer, nor pool vacuum.

I purchased an Intex Krystal Clear 1250 Gal Cartridge #28636 Filter Pump, however it comes with what looks like 38mm thick hoses with screw ends. So, how do I get this too work with my Bestway pool please?

Your help would be very much appreciated - thank you.

[Denniswiseman]

I'm not sure of your setup as I have an inground pool, but I suggest you talk to the manufacturers and ask for there input
Please post some images so we can get a better picure of what the problem is.
Or you could post on http://www.troublefreepool.com where a lot of people have above ground pools

[steveyg_uk]

Thanks.

How do I insert photos in this forum?

[Denniswiseman]

Under the reply box
Click "Full Editor & Preview"
Then drag and drop the image in that box
When you do that you can also add under attachments

[steveyg_uk]

1.jpg (7.95 KiB) Viewed 932 times

2.jpg (9.8 KiB) Viewed 932 times

3.jpg (6.21 KiB) Viewed 932 times

Hope this helps?

[Denniswiseman]

Not a lot as I'm not familar with your setup
You might take the hoses to a pool store and see if they can accomodate you
Or post where where I told you as I'm confidant that you will get a better response there

[steveyg_uk]

Thanks. Will try the later.