Cartridge Filter Goes 'Glug' 'Glug'

Pool pumps, pool filters and the plumbing of
swimming pools. Sand filters, cartridge filters,
fabric filters and alternative filter media.
TOMMCQ
Pool Newbie
Pool Newbie
Posts: 1
Joined: Fri 03 Nov, 2017 13:09
My Pool: 15'x19'x6'd
Pebbletec
Pentair Clean&Clear Cartridge 200
Whisperflow 3/4 hp

Cartridge Filter Goes 'Glug' 'Glug'

Postby TOMMCQ » Sat 04 Nov, 2017 12:46

I have a Pentair Clean & Clear cartridge filter that makes a bubble noise when the pump is turned off.
When I turn the air release valve it lets out the air along with the water in the filter tank and that stops the noise.

I have a PebbleTec finish and the pebbles get into the tank. I wash out the pebbles through the 1-1/2" drain hole in the side of the tank, but I'm wondering if the other pebbles get washed into the inlet/outlet pipes under the tank and that is creating the issue.

Do you have any thoughts on what would cause the bubbling and how to eliminate it?

Thanks for reading my question.


Teapot
Swimming Pool Superstar
Swimming Pool Superstar
Posts: 481
Joined: Tue 17 Oct, 2017 10:52
My Pool: 12 x 24 (45m3) liner pool, Triton TR60 filter with AFM glass media (Activate) and variable speed pump running 0.08HP
Location: UK

Re: Cartridge Filter Goes 'Glug' 'Glug'

Postby Teapot » Mon 06 Nov, 2017 05:03

It sounds like an air leak, isn't there a big gasket/O ring around the joint? I would look there first.

Return to “Pool Pumps, Filters, Plumbing & Piping”

Who is online at the Pool Help Forum

Users browsing this forum: CommonCrawl [Bot], Seznam [Bot] and 6 guests